All public logs

From embeddedTS Manuals

Combined display of all available logs of embeddedTS Manuals. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

Logs
(newest | oldest) View (newer 50 | ) (20 | 50 | 100 | 250 | 500)
  • 11:17, 27 March 2024 Mark talk contribs created page TS-7990 STM Magnetometer (Created page with "This board includes an ST IIS2MDCTR 3-axis magnetometer, which has a magnetic field dynamic range of ±50 gauss (16 bits of precision at up to 150 Hz). {{:TS-7250-V3 Magnetometer}}")
  • 11:16, 27 March 2024 Mark talk contribs created page TS-7990 STM ISM330 Gyroscope (Created page with "{{:TS-7250-V3 ST ISM330 Gyroscope}}")
  • 10:50, 8 March 2024 Mark talk contribs changed group membership for Alan from administrator to administrator, interface administrator, bureaucrat and suppressor
  • 13:28, 7 March 2024 User account Marc talk contribs was created by Mark talk contribs and password was sent by email
  • 13:00, 7 March 2024 Mark talk contribs changed group membership for Alan from (none) to administrator
  • 12:59, 7 March 2024 User account Alan talk contribs was created by Mark talk contribs and password was sent by email
  • 10:25, 29 September 2023 Mark talk contribs created page TS-7250-V3 16550 Notes (Created page with "This peripheral implements 16550A based UARTs which require a kernel driver. Under Linux this requires a device tree change. See the Kernel compile section for more details about getting set up the compile the kernel. In general for 16550 UARTs we recommend these kernel config options: <source lang=json> CONFIG_HZ_PERIODIC=y CONFIG_HZ_1000=y CONFIG_SERIAL_8250_TS=y </source> The default kernel is ideal for low power, but has some tradeoffs with l...")
  • 13:38, 22 September 2023 Mark talk contribs created page TS-7250-V3 Power Supply Specifications (Created page with "The TS-7250-V3 supports 2 input ranges. The +5V input on CN2, and the 8-28V input on CN12. The 8-28V input can also come from the PC104 connector's +12V signal. {| class=wikitable |- ! Input ! Min range ! Max Range |- | 5 VDC | 4.7 VDC <ref>This requires requires at least 4.7V to start up, and the onboard supervisory microcontroller will trigger a brownout reset if this dips below 4V. While the TS-7250-V3 will continue to operate at this low of a voltage, any connected...")
  • 13:09, 22 September 2023 Mark talk contribs created page TS-7250-V3 Ubuntu lunar getting started (Created page with "This Ubuntu release is available in 2 flavors with various packages. {| class=wikitable ! Image ! Estimated Size ! Description |- | [https://files.embeddedts.com/ts-arm-sbc/ts-7250-v3-linux/distributions/ubuntu/tsimx6ul_ubuntu_23_04_headless-latest.tar.xz tsimx6ul_ubuntu_23_04_headless-latest.tar.xz] | 834 MiB | * Includes [https://github.com/embeddedTS/linux-lts/tree/linux-5.10.y/ 5.10 kernel] with tsimx6ul_defconfig that includes broad driver support * Base Ubuntu wi...")
  • 11:55, 22 September 2023 Mark talk contribs created page Ubuntu 22.04 Networking (Created page with "'--mount', 'type=bind,src=/proc/,target=/work/work/rootfs/proc', The network in Ubuntu is configured netplan. For complete documentation, see [https://netplan.io/ Netplan's documentation here] Some common examples are shown below. On this release network interfaces follow the [https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/ predictible network interface names]. Run <source inline lang=bash>ip addr show</source> to get a list of the ne...")
  • 17:50, 9 August 2023 Mark talk contribs created page TS-7250-V3 Bookworm Getting Started (Created page with "This Debian release is available in 2 flavors with various packages. {| class=wikitable ! Image ! Estimated Size ! Description |- | [https://files.embeddedts.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul_debian_12_headless-latest.tar.xz tsimx6ul_debian_12_headless-latest.tar.xz] | 681 MiB | * Includes [https://github.com/embeddedTS/linux-lts/tree/linux-5.10.y/ 5.10 kernel] with tsimx6ul_defconfig that includes broad driver support * Base Debian with com...")
  • 16:08, 7 August 2023 Mark talk contribs created page TS-TPC-7990 Ethernet PHY replacement (Created page with "The TS-TPC-7990 Rev.E and later have replaced the Marvell Gbit Ethernet PHY with the Broadcom BCM54213PE. If using the stock embeddedTS u-boot this change is completely transparent and should not affect any user software. Under Linux this uses the generic Ethernet PHY driver and behaves the same as the previous Marvell PHY. U-boot has been updated to detect the new PCB, PHY, and to write PHY regs to make the Ethernet LEDs behave the same way as the previous Marvell chi...")
  • 10:28, 7 August 2023 Mark talk contribs created page TS-TPC-7990 Accelerometer replacement (Created page with "The revision D and below boards included the NXP MMA8451 3-axis accelerometer, but due to an EOL this is being replaced on the REV E and above PCBs. Instead new boards will include: * ST Microelectronics ISM330DLCTR 6-axis sensor (Accelerometer/Gyroscope) * ST Microelectronics IIS2MDCTR 3-axis Magnetoresistive sensor On the [https://github.com/embeddedTS/linux-lts/tree/linux-5.10.y LTS kernel 5.10] this is supported as of tag v5.10.170.6-ts. A user who cloned/modified a...")
  • 10:06, 7 August 2023 Mark talk contribs created page TS-7990 STM ISM330 Accelerometer (Created page with "The accelerometer is accessed through IIO as ism330dlc_accel with channels: * accel_x * accel_y * accel_z * timestamp For example: <console> root@tsimx6ul:~# iio_attr -c ism330dlc_accel accel_x dev 'ism330dlc_accel', channel 'accel_x' (input), attr 'injection_raw', ERROR: Permission denied (-13) dev 'ism330dlc_accel', channel 'accel_x' (input), attr 'raw', value '-183' dev 'ism330dlc_accel', channel 'accel_x' (input), attr 'scale', value '0.000598' dev 'ism330dlc_accel...")
  • 11:11, 28 June 2023 Mark talk contribs created page TS-4900 Bookworm Getting Started (Created page with "This Ubuntu release is available in 3 flavors with various packages. {| class=wikitable ! Image ! Estimated Size ! Description |- | [https://files.embeddedts.com/ts-arm-sbc/ts-7970-linux/distributions/debian/debian-armhf-bookworm-x11-latest.tar.bz2 debian-armhf-bookworm-x11-latest.tar.bz2] | 1021 MiB | * Includes [https://github.com/embeddedTS/linux-lts/tree/linux-5.10.y/ 5.10 kernel] with tsimx6_defconfig that includes broad driver support * Base Debian with common ut...")
  • 11:02, 28 June 2023 Mark talk contribs created page TS-4900 Ubuntu lunar Getting started (Created page with "This Ubuntu image is available in 3 flavors with various packages. {| class=wikitable ! Image ! Estimated Size ! Description |- | [https://files.embeddedts.com/ts-arm-sbc/ts-7970-linux/distributions/ubuntu/ubuntu-armhf-23.04-x11-latest.tar.bz2 ubuntu-armhf-23.04-x11-latest.tar.bz2] | 1151 MiB | * Includes [https://github.com/embeddedTS/linux-lts/tree/linux-5.10.y/ 5.10 kernel] with tsimx6_defconfig that includes broad driver support * Base Ubuntu with common utils * Co...")
  • 10:48, 28 June 2023 Mark talk contribs created page Ubuntu Lunar wifi client (Created page with " If connecting to a WPA/WPA2 network, a wpa_supplicant config file must first be created: <source lang=bash> wpa_passphrase yournetwork yournetworkpassphrase > /etc/wpa_supplicant/wpa_supplicant-wlan0.conf </source> Create the file /lib/systemd/system/wpa_supplicant@.service with these contents <source lang=bash> [Unit] Description=WPA supplicant daemon (interface-specific version) Requires=sys-subsystem-net-devices-%i.device After=sys-subsystem-net-devices-%i.device...")
  • 12:45, 22 June 2023 Mark talk contribs created page Third Party PC/104 (Created page with "Please note this peripheral is not tested with third party SBCs or connected peripherals. This card is not guaranteed to operate as intended when third party PC104 peripherals or SBCs are connected.")
  • 11:31, 31 March 2023 Mark talk contribs created page TS-7250-V3 Supervisory Temperature (Created page with "The supervisory microcontroller provides a temperature sensor to read its die temperature as millicelcius. {| class=wikitable ! iio device ! iio channel |- | tssupervisor-temp | voltage0 | temp |} These can be accessed from any language with iio bindings, from /sys/bus/iio/, or using iio_attr. For example, to reading the temperature with iio_attr: <console> root@tsimx6ul:~# iio_attr -c tssupervisor-temp temp dev 'tssupervisor-temp', channel 'temp' (input), attr 'input...")
  • 18:20, 1 March 2023 Mark talk contribs created page TS-7250-V3 Supervisory RTC (Created page with "The supervisory microcontroller also provides a real time clock to backup system time when power is lost. This RTC features: * Unsigned 32-bit counter (currently keeps time until 2106) * Alarm to wake the board up from power off * Alarm can be configured to reboot the system (eg, a slow wdt) * Battery detection. * Offset support to tune rtc in ppb * Can retain time for ~8 years with the CR1632 battery The typical RTC features are provided by the rtc-tssupervisor driver...")
  • 12:11, 27 February 2023 Mark talk contribs created page TS-4900 Buildroot Sections (Created page with "{{:TS-4900 Buildroot}} == Buildroot: Getting Started == {{:TS-4900 buildroot Getting started}} == Buildroot: Networking == {{:TS-4900 Buildroot Network configuration example}} === Buildroot: Wireless === {{:TS-4900 buildroot wifi}} == Buildroot: Application Development == {{:TS-4900 buildroot Application Development}} == Buildroot: Startup Scripts == {{:Buildroot startup scripts}}")
  • 18:02, 22 February 2023 Mark talk contribs created page TS-7250-V3 Supervisory ADC (Created page with "The supervisory microcontroller provides ADC channels to monitor onboard rails such as VIN, 5 V, 3.3 V, and more. Channels that are less than 3.3 V are provided directly by the IIO device "tssupervisor_adc". The analog frontend driver is used to rescale some channels to the range supported by this ADC. {| class=wikitable ! iio device ! iio channel ! Schematic name |- | an_3p3v | voltage0 | 3.3V |- | tssupervisor_adc | voltage1 | VDD_ARM_CAP |- | tssupervisor_adc | volta...")
  • 11:59, 22 February 2023 Mark talk contribs created page TS-7250-V3 Supervisory Reset Reasons (Created page with "The supervisory microcontroller can detect multiple reasons why the system rebooted or woke back up. These are provided by the sysfs device: <console> root@tsimx6ul:~# cat /sys/bus/platform/devices/tssupervisor-rstc/reboot_reason POR </console> {| class=wikitable |- ! reboot_reason text ! Description |- | POR | Initial boot from power/console being powered. |- | CPU WDT | CPU Watchdog initiated a reboot. |- | Software Reboot | The linux kernel initiated a reboot. |- |...")
  • 11:07, 22 February 2023 Mark talk contribs created page TS-7250-V3 Supervisory Low Power Mode (Created page with "To achieve the lowest power sleep state, the kernel is configured with the reset controller driver (ts_supervisor_rstc). This driver implements shutdown for the SBC to enter the low power state. For example, <source lang=bash inline>shutdown -h now</source> will cause a proper shutdown to the board, and then remove power to the rest of the board. It will wait for one of 3 reasons to wake back up. 1. CN8 ADC Header pin 9 has 3-30V applied. 2. 5...")
  • 11:07, 22 February 2023 Mark talk contribs deleted page TS-7250-V3 Sleep mode (content before blanking was: "This board implements a low power sleep mode using the onboard supervisory microcontroller. The microcontroller is able to power off the remainder of the board while only drawing about 55mW. This is effectively a shutdown/startup for Linux to startup/resume from this low power sleep. The board can wake using a number of milliseconds are specified for a sleep. 1000ms minimum to 4294967295 (49.7 days) maximum. The sleep mode can be entered...")
  • 11:28, 16 February 2023 Mark talk contribs created page Imx6 new emmc 2023 (Created page with "Due to parts availability future versions of this product will be built with the Alliance ASFC4G31M-51BIN. This is an equivalent 4 GB part and it is expected to have generally no impact to software. There are 2 notable differences: 1. The eMMC boot partitions (/dev/mmcblk*boot0/boot1) are 4 MB instead of 16 MB. These are not used on this series as they are not used by any default software, and are read only by default. 2. For users previously using Micron's proprietary t...")
  • 11:13, 16 February 2023 Mark talk contribs created page TS-4900 BOM Changes (Created page with "These bill of material (BOM) changes are those that have been made which may affect user software. While we try to pick parts that will have a long lifetime and remain unchanged for as long as possible. Most changes or part qualifications have little to no user impact. If any changes do possibly impact customers or require software updates, then we will document them in the following sections. Sign up for [https://pcs.embeddedts.com/ PCS updates] to receive notification...")
  • 13:45, 6 January 2023 Mark talk contribs created page Test page (Created page with "<pre> [ ! - </pre>")
  • 16:40, 5 January 2023 Mark talk contribs created page Bookworm armhf cross compile kernel docker (Created page with "For compiling the kernel for Debian 12 we recommend setting up the cross compile docker. We can use a shell script to enter the docker, and c...")
  • 15:54, 5 January 2023 Mark talk contribs created page Bookworm armhf cross compile docker (Created page with "Debian only provides their cross compiler for their distribution. Our examples will set up a Docker for Debian to use for development. If using Debian 12 Bullseye natively, or...")
  • 15:52, 5 January 2023 Mark talk contribs created page TS-4900 Bookworm WIFI client (Created page with "{{:TS-4900 Bullseye WIFI client}}")
  • 15:52, 5 January 2023 Mark talk contribs created page TS-4900 Bookworm Network (Created page with "{{:TS-4900 Bullseye Network}}")
  • 15:50, 5 January 2023 Mark talk contribs created page Bookworm installing software (Created page with "{{:Bullseye installing software}}")
  • 15:48, 5 January 2023 Mark talk contribs created page Bookworm Startup Scripts (Created page with "{{:Buster Startup Scripts}}")
  • 15:48, 5 January 2023 Mark talk contribs created page Bookworm setup ssh (Created page with "{{:Bullseye setup ssh}}")
  • 15:48, 5 January 2023 Mark talk contribs created page TS-4900 Debian 12 Sections (Created page with "== Debian 12 - Bookworm == === Debian 12 - Getting Started === {{:TS-4900 Bookworm Getting Started}} === Debian 12 - Networking === {{:TS-4900 Bookworm Network}} ==== Debian...")
  • 10:03, 16 December 2022 Mark talk contribs created page TS-7840 FPGA ADC (Created page with "The TS-7840 includes a simple low speed ADC to support the analog input on mikrobus modules. * 305hz sample rate * 8-bits resolution * 10kohm input impedance * 0-6V input r...")
  • 12:22, 13 December 2022 Mark talk contribs created page TS-7840 FPGA PWM (Created page with "The TS-7840 includes a PWM core that supports 10-bit duty/period, a 50 MHz input clock, and 12 values of input clock shift. Linux supports this API through the /sys/ interfac...")
  • 15:51, 22 November 2022 Mark talk contribs created page Wikitest (Created page with "The RTC on TS-7970's before REV H are factory calibrated and temperature compensated and will not benefit from further calibration. REV H and newer use a more traditional RTC...")
  • 15:44, 22 November 2022 Mark talk contribs created page TS-7970 RTC Calibration (Created page with "The RTC on TS-7970's before REV H are factory calibrated and temperature compensated and will not benefit from further calibration. REV H and newer use a more traditional RTC...")
  • 10:58, 17 October 2022 Mark talk contribs created page TS-7970 new micro (Created page with "Due to parts availability constraints the TS-7970 has been redesigned to support a new microcontroller for the USB serial and supervisory functions. Instead of the Silicon Lab...")
  • 09:58, 25 March 2022 Mark talk contribs created page TS-SDCORE2 (Created page with "The TS-SDCORE2 is a lightweight SD controller that bitbangs most SD access, but switches to an FPGA state machine for reads/writes. It allows control over multiple devices by...")
  • 12:25, 3 February 2022 Mark talk contribs created page Bullseye Startup Scripts (Created page with "{{:Buster Startup Scripts}}")
  • 12:25, 3 February 2022 Mark talk contribs created page Bullseye setup ssh (Created page with "{{:Buster setup ssh}}")
  • 12:24, 3 February 2022 Mark talk contribs created page Bullseye installing software (Created page with "{{:Buster installing software}}")
  • 12:24, 3 February 2022 Mark talk contribs created page TS-4900 Bullseye WIFI client (Created page with "{{:Stretch WIFI client}}")
  • 12:23, 3 February 2022 Mark talk contribs created page TS-4900 Bullseye Network (Created page with "{{:TS-7250-V3 Buster Network}}")
  • 12:17, 3 February 2022 Mark talk contribs created page TS-4900 Bullseye Getting Started (Created page with "The Debian images apply to the TS-4900, TS-7970, and TS-TPC-7990. {| class=wikitable ! Image ! Size ! Kernel config ! Description |- | [https://files.embeddedTS.com/ts-socke...")
  • 15:28, 2 February 2022 Mark talk contribs created page File:Logo.svg
  • 15:28, 2 February 2022 Mark talk contribs uploaded File:Logo.svg
(newest | oldest) View (newer 50 | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "http://docs.embeddedTS.com/Special:Log/Mark"