TS-12W

From embeddedTS Manuals
TS-12W
TS-12W.jpg
Released Mar. 2004
Product Page
Documents
Schematic
Power Requirements
Up to 2.4 Amps @ +5V DC
Operating Temperature
Cold -40C
Hot 85C
Mechanical
22.5mm X 90mm X 100mm (W x H x D)

Overview

The TS-12W is a 12 watt power supply that provides regulated +5 VDC to a single board computer via the PC/104 bus. Two PC/104 mounting holes are provided to allow the TS-12W to be positioned as the top board on the PC/104 stack and provide power to the entire stack. Safety features include over-current limit, thermal shutdown and reverse polarity protection. Ferrite beads and capacitor filters allow the TS-12W coupled with a single board computer to operate well in industrial environments. The LED indicates status of +5 VDC output.

Features

  • LED to indicate status of +5VDC output
  • Regulated +5VDC is provided to a single board computer via the PC/104 bus (2.4 Amps max)
  • Remote shutdown input allows external control of +5VDC output voltage.
    • TTL compatible input:
      • Logic 1 = 5 volt off
      • Logic 0 = 5 volt on
      • Open = 5 vold on
  • Highly efficient switching power supply produces very low heat
  • Lockout circuit prevents operation when input voltage is below 10VDC
  • Reverse polarity protection and ferrite noise suppression
  • 10-340VDC input voltage has quick disconnect with screw terminals

Usage with 3rd party devices

Please note that while efforts are made to follow the PC/104 specification this peripheral is not tested with third party SBCs or connected peripherals. This card is not guaranteed to operate as intended when third party PC104 peripherals or SBCs are connected.