TS-4710 MicroSD Backup/restore
| WARNING: | While tools exist for writing image from Windows or other operating systems, we do not support their use. If they are not careful to make sure the OS has not mounted the FS, or existing drivers have ceased any access to the card, they may end up with corruption that is not immediately apparent upon using the card. This may present as sublte corruption, or a card that does not boot at all. We do not encourage use of any other process other than what is described in this section. |
|
Click to download the latest 4GB SD card image. |
Using onboard web interface
The initramfs contains a #Web interface that can be used to backup/restore the software image. From the main page, you can download a complete backup containing the MBR, Kernel, initramfs, and Debian filesystem by clicking "backup.dd". You can click "Choose File" and browse to a previous backup.dd, or the link above to rewrite the SD card.
Using another Linux workstation
If you do not have an SD card that can boot to the initramfs, you can download the sd card image and rewrite this from a Linux workstation. A USB MicroSD adapter can be used to access the card. First, you must find out which /dev/ device corresponds with your USB reader/writer.
Step 1 Option 1 (lsblk)
Newer distributions include a utility called "lsblk" which allows simple identification of the intended card:
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 400G 0 disk ├─sda1 8:1 0 398G 0 part / ├─sda2 8:2 0 1K 0 part └─sda5 8:5 0 2G 0 part [SWAP] sr0 11:0 1 1024M 0 rom sdc 8:32 1 3.9G 0 disk ├─sdc1 8:33 1 7.9M 0 part ├─sdc2 8:34 1 2M 0 part ├─sdc3 8:35 1 2M 0 part └─sdc4 8:36 1 2.8G 0 part
In this case my SD card is 4GB, so sdc is the target device.
Step 1 Option 2 (dmesg)
After plugging in the device, you can use dmesg to list
scsi 9:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2 sd 9:0:0:0: Attached scsi generic sg2 type 0 sd 9:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
In this case, sdc is shown as a 3.96GB card.
Step 2
Once you have the target /dev/ device you can use "dd" to backup/restore the card. To restore the board to stock, or rewrite to the latest SD image:
wget https://files.embeddedTS.com/ts-socket-macrocontrollers/ts-4710-linux/binaries/ts-images/4gbsd-471x-latest.dd.bz2
bzip2 -d 4gbsd-471x-latest.dd.bz2
# Specify your block device instead of /dev/sdc
# Note that this does not include a partition, so use /dev/sdc instead of
# using /dev/sdc1
dd if=4gbsd-471x-latest.dd conv=fsync bs=4M of=/dev/sdc
To take a backup of your entire SD card, you can switch the input file and the output file:
dd if=/dev/sdc conv=fsync bs=4M of=backup.dd