4700 USB OTG: Difference between revisions
From embeddedTS Manuals
No edit summary |
mNo edit summary |
||
Line 6: | Line 6: | ||
</source> | </source> | ||
Device mode of OTG will function without having to write to the above | Device mode of OTG will function without having to write to the above proc file. | ||
{{Note|When paired with the TS-8160 the OTG port is exposed as the lower USB host A port. Because of this the above command needs to be run whenever a USB device is attached to the port in order to tell the OTG driver to enter host mode and communicate with the USB device.}} | {{Note|When paired with the TS-8160 the OTG port is exposed as the lower USB host A port. Because of this the above command needs to be run whenever a USB device is attached to the port in order to tell the OTG driver to enter host mode and communicate with the USB device.}} |
Latest revision as of 16:50, 28 October 2011
This board features USB OTG which allows you to use the USB port as either a host, or a device. Much of the USB OTG framework is described here. You will need to recompile your kernel to include these modules.
The OTG driver from Marvell has a caveat attached to it, whenever the OTG port is to be used as a host the following command needs to be issued after the device is plugged in:
echo 1 > /proc/driver/otg
Device mode of OTG will function without having to write to the above proc file.
Note: | When paired with the TS-8160 the OTG port is exposed as the lower USB host A port. Because of this the above command needs to be run whenever a USB device is attached to the port in order to tell the OTG driver to enter host mode and communicate with the USB device. |