Console From Linux Workstation: Difference between revisions
From embeddedTS Manuals
(Adding ACM0 breaks non-Renesas boards; {{Console_From_Linux_Workstation|USB0}} will now omit ACM0 references) |
No edit summary |
||
| Line 1: | Line 1: | ||
''' Console from Linux ''' | ''' Console from Linux ''' | ||
There are many serial terminal applications for Linux, three common used applications are 'picocom', 'screen', and 'minicom'. These examples demonstrate all three applications and assume that the serial device is "/dev/ttyUSB0" which is common for USB adapters. Be sure to replace the serial device string with that of the device on your workstation. | There are many serial terminal applications for Linux, three common used applications are 'picocom', 'screen', and 'minicom'. These examples demonstrate all three applications and assume that the serial device is "/dev/ttyUSB0" which is common for USB adapters. Be sure to replace the serial device string with that of the device on your workstation. | ||
'picocom' is a very small and simple client. | 'picocom' is a very small and simple client. | ||
<source lang=bash> | <source lang=bash> | ||
| Line 18: | Line 16: | ||
<source lang=bash> | <source lang=bash> | ||
picocom -b 115200 /dev/ttyUSB0 | picocom -b 115200 /dev/ttyUSB0 | ||
</source> | </source> | ||
| Line 29: | Line 22: | ||
screen /dev/ttyUSB0 115200 | screen /dev/ttyUSB0 115200 | ||
</source> | </source> | ||
Or a very commonly used client is 'minicom' which is quite powerful but requires some setup: | Or a very commonly used client is 'minicom' which is quite powerful but requires some setup: | ||
Revision as of 13:27, 22 April 2024
Console from Linux
There are many serial terminal applications for Linux, three common used applications are 'picocom', 'screen', and 'minicom'. These examples demonstrate all three applications and assume that the serial device is "/dev/ttyUSB0" which is common for USB adapters. Be sure to replace the serial device string with that of the device on your workstation.
'picocom' is a very small and simple client.
picocom -b 115200 /dev/ttyUSB0
'screen' is a terminal multiplexer which happens to have serial support.
screen /dev/ttyUSB0 115200
|
'picocom' is a very small and simple client.
picocom -b 115200 /dev/ttyUSB0
'screen' is a terminal multiplexer which happens to have serial support.
screen /dev/ttyUSB0 115200
Or a very commonly used client is 'minicom' which is quite powerful but requires some setup:
minicom -s
- Navigate to 'serial port setup'
- Type "a" and change location of serial device to '/dev/ttyUSB0' then hit "enter"
- If needed, modify the settings to match this and hit "esc" when done:
E - Bps/Par/Bits : 115200 8N1
F - Hardware Flow Control : No
G - Software Flow Control : No
- Navigate to 'Save setup as dfl', hit "enter", and then "esc"