TS-4100 Kernel Compile Guide

Compiling the kernel requires an armhf toolchain. We recommend development under Debian Stretch which includes an armhf compiler in the repositories. See the Debian Stretch cross compilation section for instructions on installing a proper cross compiler.

# Install dependencies for kernel build
# The following command is for Ubuntu / Debian workstations. If using a different
# distribution, please consult distribution docs for the proper commands to install
# new packages/tools/libraries/etc.
apt-get install libncurses5-dev bc

# Clone the kernel repository
git clone https://github.com/embeddedTS/linux-4.9.y
cd linux-4.9.y

# Set necessary environment variables for building
export ARCH=arm
export CROSS_COMPILE=arm-linux-gnueabihf-
export LOADADDR=0x80800000

# The following defconfig is the same kernel configuration the unit ships with
make tsimx6ul_defconfig

## Make any changes in "make menuconfig" or driver modifications, then compile
make && make zImage && make modules

To install the kernel and modules to an SD card, attach it to the PC and assuming the the SD card shows up as "/dev/sdX", where "X" is the letter drive corresponding to the SD card. Ensure that you are in the kernel directory "linux-4.9.y" before you run the following:

export DEV=/dev/sdX1
sudo mount "$DEV" /mnt/sd
sudo cp arch/arm/boot/zImage  /mnt/sd/boot/zImage
sudo cp arch/arm/boot/dts/imx6ul*ts*.dtb /mnt/sd/boot/
INSTALL_MOD_PATH="/mnt/sd" sudo -E make modules_install 
sudo -E make headers_install INSTALL_HDR_PATH="/mnt/sd/usr"
sudo umount /mnt/sd/
sync

Note:

Shutting down and coming back or operating from another shell instance will require you to re-export your environment variables.