TS-7250-V3 LCD Header: Difference between revisions
From embeddedTS Manuals
(Created page with "The LCD header is a 0.1" pitch 2x7 header including GPIO. This is designed around compatibility with the HD44780 LCD controller which includes our [https://www.embeddedarm.co...") |
No edit summary |
||
Line 12: | Line 12: | ||
|- | |- | ||
| 1 | | 1 | ||
| [[# | | [[#Board Rails|5V]] | ||
|- | |- | ||
| 2 | | 2 | ||
Line 18: | Line 18: | ||
|- | |- | ||
| 3 | | 3 | ||
| [[#GPIO|GPIO Bank | | LCD_RS [[#GPIO|GPIO Bank 2 IO 23]] | ||
|- | |- | ||
| 4 | | 4 | ||
| [[#GPIO| | | LCD_BIAS [[#PWM|PWM0]] / [[#GPIO|GPIO Bank 2 IO 24]] <ref>This pin is used to dynamically adjust contract on the LCD. This may need to be tuned depending on the environment or altitude where the display is used.</ref> | ||
|- | |- | ||
| 5 | | 5 | ||
| [[#GPIO|GPIO Bank 5 IO | | LCD_EN [[#GPIO|GPIO Bank 5 IO 20]] | ||
|} | |} | ||
| | | | ||
[[File:TS-7250-V3- | [[File:TS-7250-V3-LCD Header.svg|302px]] | ||
|} | |} | ||
<References /> | <References /> |
Revision as of 13:31, 27 February 2020
The LCD header is a 0.1" pitch 2x7 header including GPIO. This is designed around compatibility with the HD44780 LCD controller which includes our LCD-LED.
Signals | Pin Layout | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
- ↑ This pin is used to dynamically adjust contract on the LCD. This may need to be tuned depending on the environment or altitude where the display is used.