TS-7250-V3 TS-RELAY8: Difference between revisions
From embeddedTS Manuals
No edit summary |
m (Links auto-updated for 2022 re-branding ( http://www.embeddedarm.com/products/board-detail.php?product=TS-RELAY8 → http://www.embeddedTS.com/products/board-detail.php?product=TS-RELAY8)) |
||
Line 6: | Line 6: | ||
|labelstyle = width:33% | |labelstyle = width:33% | ||
|datastyle = | |datastyle = | ||
|data1 = [http://www. | |data1 = [http://www.embeddedTS.com/products/board-detail.php?product=TS-RELAY8 Product Page] | ||
|header2 = 8-bit IO | |header2 = 8-bit IO | ||
}} | }} |
Latest revision as of 17:09, 17 January 2022
Product Page | |
8-bit IO |
---|
The TS-RELAY8 includes 8 SPDT relays. These are capable of switching up to 5A at 30VDC or 30VAC.
See sections of the TS-RELAY8 guide for register / jumper documentation:
WARNING: | The TS-RELAY8 will energize relays immediately on poweron due to a hardware bug with this specific combination of hardware. Make sure your usage can tolerate this small flicker on poweron of several ms. |
This example assumes no jumpers are installed on the TS-RELAY8.
# Verify the TS-RELAY8 is detected. This should return 0x9b
pc104_peekpoke io 8 0x140
# Turn on just RLY1
pc104_peekpoke io 8 0x142 0x1
#Turn on RLY1 and RLY4
pc104_peekpoke io 8 0x142 0x9
# Turn on all relays.
pc104_peekpoke io 8 0x142 0xFF
# Turn off all relays (default state)
pc104_peekpoke io 8 0x142 0x0