TS-7600 SD Controller

From embeddedTS Manuals
Revision as of 19:26, 7 August 2013 by Kris (talk | contribs) (Created page with "The i.MX28 SD card controller is used for both SD cards present on the board which supports the SD and SDHC specifications. This controller has been tested with Sandisk Extre...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The i.MX28 SD card controller is used for both SD cards present on the board which supports the SD and SDHC specifications. This controller has been tested with Sandisk Extreme SD cards which allow read speeds up to 20.5MB/s, and write speeds up to 21.5MB/s.

Our default software image contains 3 partitions:

Device Contents
/dev/mmcblk0 SD Card block device
/dev/mmcblk0p1 FAT32 partition
/dev/mmcblk0p2 Kernel and initramfs
/dev/mmcblk0p3 Full Debian linux partition
Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-7600_SD_Controller&oldid=4373"