TS-7670 CAN: Difference between revisions
No edit summary |
(Removed invalid link and reordered section to allow for appending of generic section) |
||
| Line 4: | Line 4: | ||
ifconfig can0 up | ifconfig can0 up | ||
ifconfig can1 up | ifconfig can1 up | ||
</source><br> | </source><br> | ||
| Line 25: | Line 17: | ||
</source><br> | </source><br> | ||
At this point the ports can be used with standard SocketCAN libraries. In debian we provide cansend and candump to test the ports or as a simple packet send/recv tool. In order to test the two ports together, tie CAN_H of both CAN ports together, and do the same for CAN_L. Then use the following commands: | |||
<source lang="bash"> | |||
candump can0 & | |||
cansend can1 can1 7DF#03010C | |||
#This command will return | |||
can0 7DF [3] 03 01 0C | |||
</source><br> | |||
Latest revision as of 10:28, 20 July 2016
The TS-7670 i.MX286 CPU has two FlexCAN ports that use the linux SocketCAN implementation. The ports can be set up and used with the following commands:
modprobe flexcan
ifconfig can0 up
ifconfig can1 up
In order to set the baud rate of either CAN interface, the interface must first be brought down with:
ifconfig canX down
Where "X" is interface 0 or 1. At this point, the desired baud rate can be directly entered in to the file "/sys/devices/platform/FlexCAN.X/bitrate", where X is the desired interface. For example, to set a baud rate of 750kHz on both interfaces:
echo 750000 > /sys/devices/platform/FlexCAN.0/bitrate
echo 750000 > /sys/devices/platform/FlexCAN.1/bitrate
At this point the ports can be used with standard SocketCAN libraries. In debian we provide cansend and candump to test the ports or as a simple packet send/recv tool. In order to test the two ports together, tie CAN_H of both CAN ports together, and do the same for CAN_L. Then use the following commands:
candump can0 &
cansend can1 can1 7DF#03010C
#This command will return
can0 7DF [3] 03 01 0C