TS-7680 SD Controller

From embeddedTS Manuals
Revision as of 14:07, 20 November 2015 by Kris (talk | contribs) (Created page with "The i.MX28 SD card controller is used for the SD card present on the board which supports the SD and SDHC specifications. This controller has been tested with Sandisk Extreme...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The i.MX28 SD card controller is used for the SD card present on the board which supports the SD and SDHC specifications. This controller has been tested with Sandisk Extreme SD cards which allow read speeds up to 20.5MB/s, and write speeds up to 21.5MB/s.

Our default software image contains 2 partitions:

Device Contents
/dev/mmcblk0 SD Card block device
/dev/mmcblk0p1 Unused
/dev/mmcblk0p2 Full Debian linux partition
Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-7680_SD_Controller&oldid=6677"