TS-7970 Power Consumption: Difference between revisions
From embeddedTS Manuals
No edit summary |
No edit summary |
||
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
The i.MX6 power consumption can vary a lot depending on the build and activity of the board. Most of the power savings happens automatically when the | The i.MX6 power consumption can vary a lot depending on the build and activity of the board. Most of the power savings happens automatically when the CPU and GPU are idle. It is also possible to disable the Ethernet PHY for extra savings. | ||
<source lang=bash> | <source lang=bash> | ||
# Put ETH PHY in reset | # Put ETH PHY in reset | ||
Line 8: | Line 8: | ||
echo 43 > /sys/class/gpio/export | echo 43 > /sys/class/gpio/export | ||
echo low > /sys/class/gpio/gpio43/direction | echo low > /sys/class/gpio/gpio43/direction | ||
</source> | </source> | ||
Ethernet is not connected unless otherwise specified | Ethernet is not connected unless otherwise specified. Serial is disconnected during the measurement. The CPU test is 5x processes of "openssl speed". The GPU test is Qt5CinematicExperience in the Yocto image. | ||
These tests are performed powering the board through 5V. | These tests are performed powering the board through 5V. | ||
Line 24: | Line 18: | ||
|- | |- | ||
! Test | ! Test | ||
! Max | ! Max Watts | ||
! Average | ! Average Watts | ||
|- | |- | ||
| CPU 100% + GPU loaded (LCD 100%) + IO + Ethernet + HDMI | | CPU 100% + GPU loaded (LCD 100%) + IO + Ethernet + HDMI | ||
Line 57: | Line 51: | ||
| Using onboard uC to sleep CPU | | Using onboard uC to sleep CPU | ||
| 0.025 (125 mA) | | 0.025 (125 mA) | ||
| 0. | | 0.022 (4.4 mA) | ||
|} | |} | ||
Line 64: | Line 58: | ||
|- | |- | ||
! Test | ! Test | ||
! Max | ! Max Watts | ||
! Average | ! Average Watts | ||
|- | |- | ||
| CPU 100% + GPU loaded (LCD 100%) + IO + Ethernet + HDMI | | CPU 100% + GPU loaded (LCD 100%) + IO + Ethernet + HDMI | ||
Line 105: | Line 99: | ||
| Using onboard uC to sleep CPU | | Using onboard uC to sleep CPU | ||
| 0.025 (125 mA) | | 0.025 (125 mA) | ||
| 0. | | 0.022 (4.4 mA) | ||
|} | |} |
Latest revision as of 13:37, 17 October 2022
The i.MX6 power consumption can vary a lot depending on the build and activity of the board. Most of the power savings happens automatically when the CPU and GPU are idle. It is also possible to disable the Ethernet PHY for extra savings.
# Put ETH PHY in reset
echo 116 > /sys/class/gpio/export
echo high > /sys/class/gpio/gpio116/direction
# Put USB HUB in reset
echo 43 > /sys/class/gpio/export
echo low > /sys/class/gpio/gpio43/direction
Ethernet is not connected unless otherwise specified. Serial is disconnected during the measurement. The CPU test is 5x processes of "openssl speed". The GPU test is Qt5CinematicExperience in the Yocto image.
These tests are performed powering the board through 5V.
Test | Max Watts | Average Watts |
---|---|---|
CPU 100% + GPU loaded (LCD 100%) + IO + Ethernet + HDMI | 4.50 (0.90 A) | 3.40 (0.68 A) |
CPU 100% | 2.80 (0.56 A) | 2.35 (0.47 A) |
CPU Idle + HDMI | 2.75 (0.55 A) | 2.05 (0.41 A) |
CPU Idle + CPU Ethernet | 2.75 (0.55 A) | 2.20 (0.44 A) |
CPU Idle | 2.50 (0.50 A) | 1.95 (0.39 A) |
CPU Idle USB HUB off | 2.75 (0.55 A) | 1.95 (0.39 A) |
CPU Idle USB HUB off, Ethernet PHY in reset | 2.15 (0.43 A) | 1.60 (0.32 A) |
Using onboard uC to sleep CPU | 0.025 (125 mA) | 0.022 (4.4 mA) |
Test | Max Watts | Average Watts |
---|---|---|
CPU 100% + GPU loaded (LCD 100%) + IO + Ethernet + HDMI | 10.80 (2.16 A) | 7.75 (1.55 A) |
CPU 100% | 6.15 (1.23 A) | 5.40 (1.08 A) |
CPU Idle + HDMI | 4.55 (0.91 A) | 2.90 (0.58 A) |
CPU Idle + WIFI on wpa2 running iperf | 6.85 (1.37 A) | 3.95 (0.79 a) |
CPU Idle + CPU Ethernet | 5.00 (1.00 A) | 3.10 (0.62 A) |
CPU Idle + PCIe Ethernet | 3.60 (0.72 A) | 2.85 (0.57 A) |
CPU Idle | 4.85 (0.97 A) | 2.80 (0.56 A) |
CPU Idle USB HUB off | 3.50 (0.70 A) | 2.75 (0.55 A) |
CPU Idle USB HUB off, Ethernet PHY in reset | 3.30 (0.66 A) | 2.40 (0.48 A) |
Using onboard uC to sleep CPU | 0.025 (125 mA) | 0.022 (4.4 mA) |