TS-7970 U-boot changelog: Difference between revisions
From embeddedTS Manuals
m (FTP links auto-updated (ftp://ftp.embeddedarm.com/ → https://files.embeddedarm.com/)) |
No edit summary |
||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
{| class=wikitable | {| class=wikitable | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Jun-17-2015] | ||
| | | | ||
* Added TS-7970 support | * Added TS-7970 support | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Jul-27-2015] | ||
| | | | ||
* Added fix for PCIe hang in Linux. Some of the GPR1 regs were not being reset after a reboot. U-boot will now reset these before going into Linux. This hang was not present on all CPUs, usually solo, and only if PCIe is enabled in the kernel. | * Added fix for PCIe hang in Linux. Some of the GPR1 regs were not being reset after a reboot. U-boot will now reset these before going into Linux. This hang was not present on all CPUs, usually solo, and only if PCIe is enabled in the kernel. | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Oct-07-2015] | ||
| | | | ||
* TS-7970 now has a POR on every reboot | * TS-7970 now has a POR on every reboot | ||
Line 15: | Line 15: | ||
* PUSH_SW is now read through i2c to free up FPGA_IRQ_1 | * PUSH_SW is now read through i2c to free up FPGA_IRQ_1 | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ May-09-2016] | ||
| | | | ||
* Updated to imx_v2015.04_3.14.52_1.1.0_ga branch | * Updated to imx_v2015.04_3.14.52_1.1.0_ga branch | ||
Line 22: | Line 22: | ||
* Disabled NFS umountall | * Disabled NFS umountall | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ May-27-2016] | ||
| | | | ||
* Added tsmicroctl command to read adc values, or start the sleep mode for the board. Requires a silabs from May 27th 2016 or later to include the sleep mode. | * Added tsmicroctl command to read adc values, or start the sleep mode for the board. Requires a silabs from May 27th 2016 or later to include the sleep mode. | ||
Line 28: | Line 28: | ||
{{Warning|Do not update past this u-boot without having REV 5 of the FPGA or the FPGA will not be reset on startup.}} | {{Warning|Do not update past this u-boot without having REV 5 of the FPGA or the FPGA will not be reset on startup.}} | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Jun-03-2016] | ||
| | | | ||
* Added suggested fixes for Micrel PHY errata. | * Added suggested fixes for Micrel PHY errata. | ||
* Added FPGA and Silabs revision to startup output. | * Added FPGA and Silabs revision to startup output. | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Jan-11-2017] | ||
| | | | ||
* Added REV D support | * Added REV D support | ||
Line 39: | Line 39: | ||
* Allow solo to boot at 85C instead of 80C, quad is still 80C. | * Allow solo to boot at 85C instead of 80C, quad is still 80C. | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Feb-17-2017] | ||
| | | | ||
* Added check for 64bit ext4 filesystem. | * Added check for 64bit ext4 filesystem. | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Mar-27-2017] | ||
| | | | ||
* Changed string to indicate REV D/E for new boards. | * Changed string to indicate REV D/E for new boards. | ||
* Added I2C recovery improvements for fixing stuck bus | * Added I2C recovery improvements for fixing stuck bus | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Mar-23-2018] | ||
| | | | ||
* Add support for SST26VF064BA, and IS25LP064A spi flashes | * Add support for SST26VF064BA, and IS25LP064A spi flashes | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Nov-14-2018] | ||
| | | | ||
* Reduced USB block size to 256B to improve compatibility with USB thumbdrives. | * Reduced USB block size to 256B to improve compatibility with USB thumbdrives. | ||
|- | |- | ||
| [https://files. | | [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Mar-31-2020] | ||
| | | | ||
* Added support for the new TS-7970 revisions | * Added support for the new TS-7970 revisions | ||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Oct-06-2022] | |||
| | |||
* Added support for detecting REV H PCBs | |||
|} | |} |
Latest revision as of 17:32, 6 October 2022
Jun-17-2015 |
| ||
Jul-27-2015 |
| ||
Oct-07-2015 |
| ||
May-09-2016 |
| ||
May-27-2016 |
| ||
Jun-03-2016 |
| ||
Jan-11-2017 |
| ||
Feb-17-2017 |
| ||
Mar-27-2017 |
| ||
Mar-23-2018 |
| ||
Nov-14-2018 |
| ||
Mar-31-2020 |
| ||
Oct-06-2022 |
|