TS-7970 U-boot changelog: Difference between revisions
From embeddedTS Manuals
(Created page with "The TS-7970 shares a u-boot source with the TS-4900, so not all of these builds will apply to the TS-7970: {{:TS-4900 U-boot changelog}}") |
No edit summary |
||
(17 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
{| class=wikitable | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Jun-17-2015] | |||
| | |||
* Added TS-7970 support | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Jul-27-2015] | |||
| | |||
* Added fix for PCIe hang in Linux. Some of the GPR1 regs were not being reset after a reboot. U-boot will now reset these before going into Linux. This hang was not present on all CPUs, usually solo, and only if PCIe is enabled in the kernel. | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Oct-07-2015] | |||
| | |||
* TS-7970 now has a POR on every reboot | |||
* TS-7970 can reload the FPGA from a /boot/ts7970.vme file | |||
* PUSH_SW is now read through i2c to free up FPGA_IRQ_1 | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ May-09-2016] | |||
| | |||
* Updated to imx_v2015.04_3.14.52_1.1.0_ga branch | |||
* Updated DDR config to latest NXP recommendations | |||
* Includes new thermal driver. If the CPU has overheated and rebooted it will wait in u-boot until the system cools down to the temperature specified in the thermal fuses. These are adjustable one time in software. | |||
* Disabled NFS umountall | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ May-27-2016] | |||
| | |||
* Added tsmicroctl command to read adc values, or start the sleep mode for the board. Requires a silabs from May 27th 2016 or later to include the sleep mode. | |||
* Added FPGA_RESET# through a signal rather than a FPGA POR. Requires FPGA REV 5 for FPGA reset to work correctly. | |||
{{Warning|Do not update past this u-boot without having REV 5 of the FPGA or the FPGA will not be reset on startup.}} | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Jun-03-2016] | |||
| | |||
* Added suggested fixes for Micrel PHY errata. | |||
* Added FPGA and Silabs revision to startup output. | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Jan-11-2017] | |||
| | |||
* Added REV D support | |||
* Added Marvell PHY support | |||
* Allow solo to boot at 85C instead of 80C, quad is still 80C. | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Feb-17-2017] | |||
| | |||
* Added check for 64bit ext4 filesystem. | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Mar-27-2017] | |||
| | |||
* Changed string to indicate REV D/E for new boards. | |||
* Added I2C recovery improvements for fixing stuck bus | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Mar-23-2018] | |||
| | |||
* Add support for SST26VF064BA, and IS25LP064A spi flashes | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Nov-14-2018] | |||
| | |||
* Reduced USB block size to 256B to improve compatibility with USB thumbdrives. | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Mar-31-2020] | |||
| | |||
* Added support for the new TS-7970 revisions | |||
|- | |||
| [https://files.embeddedTS.com/ts-arm-sbc/ts-7970-linux/u-boot/ Oct-06-2022] | |||
| | |||
* Added support for detecting REV H PCBs | |||
|} |
Latest revision as of 17:32, 6 October 2022
Jun-17-2015 |
| ||
Jul-27-2015 |
| ||
Oct-07-2015 |
| ||
May-09-2016 |
| ||
May-27-2016 |
| ||
Jun-03-2016 |
| ||
Jan-11-2017 |
| ||
Feb-17-2017 |
| ||
Mar-27-2017 |
| ||
Mar-23-2018 |
| ||
Nov-14-2018 |
| ||
Mar-31-2020 |
| ||
Oct-06-2022 |
|