TS-7970 U-boot changelog: Difference between revisions

From embeddedTS Manuals
No edit summary
No edit summary
Line 16: Line 16:
|-
|-
| [ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4900-linux/u-boot/ May-09-2016]
| [ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4900-linux/u-boot/ May-09-2016]
|
* Updated to imx_v2015.04_3.14.52_1.1.0_ga branch
* Updated to imx_v2015.04_3.14.52_1.1.0_ga branch
* Updated DDR config to latest NXP recommendations
* Updated DDR config to latest NXP recommendations

Revision as of 11:14, 10 May 2016

Jun-17-2015
  • Added TS-7970 support
Jul-27-2015
  • Added fix for PCIe hang in Linux. Some of the GPR1 regs were not being reset after a reboot. U-boot will now reset these before going into Linux. This hang was not present on all CPUs, usually solo, and only if PCIe is enabled in the kernel.
Oct-07-2015
  • TS-7970 now has a POR on every reboot
  • TS-7970 can reload the FPGA from a /boot/ts7970.vme file
  • PUSH_SW is now read through i2c to free up FPGA_IRQ_1
May-09-2016
  • Updated to imx_v2015.04_3.14.52_1.1.0_ga branch
  • Updated DDR config to latest NXP recommendations
  • Includes new thermal driver. If the CPU has overheated and rebooted it will wait in u-boot until the system cools down to the temperature specified in the thermal fuses. These are adjustable one time in software.
  • Disabled NFS umountall
Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-7970_U-boot_changelog&oldid=7181"