TS-8820-iso485

From embeddedTS Manuals
Revision as of 17:55, 22 September 2021 by Kris (talk | contribs) (Add note on termination jumper)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The TS-8820 provides a single isolated RS-485 port on the P10 terminal block. The UART interface itself is from the SoM with the TS-8820 facilitating the isolated RS-485 physical interface.

Optionally, a 124 ohm termination resistor can be electrically added by setting the Term. 485 jumper.

Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-8820-iso485&oldid=14129"