Search
TS-TPC-7990 PCB Changelog
From embeddedTS Manuals
More
More
Page actions
Read
View source
View history
Revision as of 09:57, 20 July 2017 by
Mark
(
talk
|
contribs
)
(
diff
)
← Older revision
|
Latest revision
(
diff
) |
Newer revision →
(
diff
)
Revision
Changes
A
Initial Release
B
Changed to Marvell PHY
Changed speaker to Piezo to save space, and it is louder for alarm implementations.
Added Nimblelink Socket
Fixed touch controller to have correct IRQ polarity for sleep mode
Changed 5V regulator to provide higher current (2.5 A to 5 A)
Fixed SW_5V FET from being held off by offboard RS-232
Auto select LCD voltage rails with no specific strapping resistors differentiating build
Changed WIFI from TIWI-BLE to equivalent Atmel/Microchip WILC3000 module with 12 year availability.
WIFI DOES NOT WORK ON THIS BOARD REVISION
Micro USB ports both moved a few mm in to fix interference with daughter cards
CN26 modified to support our daughtercards
Backlight regulator has GPIO enable allowing backlight to be entirely turned off besides PWM.
Removed SIM socket
Changed scan on Microtips LCD to rotate 180 degrees to match other LCDs
Added SATA/PCIe MUX. Mode is selected in u-boot.
Changed 11V regulator
Grounded CPU DIO (Ball L21) to identify REV B builds.
Additional minor changes for internal production
C
WIFI moved to SPI to avoid SDIO bug in wifi chip. WIFI works now with latest kernel.
R198 removed means REV C board.
Added PCIe reset GPIO. Fixed some devices not working after a software reboot.
XBEE_RESET# moved to FPGA GPIO
TOUCH_RESET# moved to CPU GPIO so rare i2c bus lockups can be recovered with a reboot.
Minor layout fixes
Minor changes to CN99 for production
Navigation
Navigation
Documentation Home
embeddedTS.com
Page tools
Page tools
Userpage tools
More
Printable version