Overview
The TS-TPC-8390 is a complete touch panel computer solution comprised of a 7" TFT LCD, TS-8390 baseboard and a choice of macrocontroller CPUs. It is an ideal solution for applications requiring a touch screen human machine interface (HMI), such as industrial automation, home automation, self-service machines, and point-of-sale terminals. This product offers an excellent value with a full range of features and industry standard connectors and a fanless, low power, high performance modular design. TS-TPC-8390 also provides an upgrade path for Technologic Systems' customers currently using TS-TPC-7390 and TS-TPC-7395 products.
TS-4700
See the TS-4700 page for functionality regarding the CPU, FPGA, and OS.
Getting Started
The TS-8390 board has no specific boot sequence since the processor and Linux Operating System are located on the selected TS-4000 Series Macrocontroller. For the rest of the boot and setup procedure, please refer to the manual for the selected TS-4000 series Macrocontroller you are using.
Before attempting to apply power to the TS-8390, perform the following steps while taking proper static discharge precautions
- Place the TS-8390 base board on a firm non-conductive surface.
- Alternatively on the provided stand.
- Carefully, insert the TS-4000 Series Macrocontroller daughterboard by aligning and pressing evenly and firmly onto the pair of mating connectors.
- If ordered together these will already come preassembled.
- Connect the RC-DB9 to the 10 pin COM1 header lining up the red wire to the white dot on the board.
- Connect the Ethernet cable if applicable.
- Make sure the jumper is on the "Console Enable" pins, and connect the "SD Boot" pins for the full X11 interface.
- Apply 5-28V of power to the two power pins. Please note the polarity printed on the board.
- Monitor the TS-SOCKET SBC using a terminal emulator connected to the serial console port to verify that the board is operating properly
See the TS-4700 page for more details on dealing with the functionality of the macrocontroller.
Features
COM ports
Port
|
Type
|
Source
|
RX (or 485 +)
|
TX (or 485 -)
|
TX Enable
|
Notes
|
ttyS0
|
TTL
|
CPU
|
DIO Header pin 8
|
DIO Header pin 7
|
N/A
|
The TS-9445 brings out an RS232 port
|
ttyS0
|
RS232
|
CPU
|
COM1 Header pin 2, Expansion Header pin 3
|
COM1 Header pin 3, Expansion Header pin 5
|
N/A
|
console enable jumper on
|
XUART0
|
RS485
|
FPGA
|
COM1 Header pin 1, Expansion Header pin 16
|
COM1 Header pin 6, Expansion Header pin 14
|
Used by U18
|
|
XUART1
|
RS232
|
FPGA
|
COM1 Header pin 2, Expansion Header pin 3
|
COM1 Header pin 3, Expansion Header pin 5
|
N/A
|
console enable jumper off
|
XUART2
|
RS232
|
FPGA
|
COM1 Header pin 8, Expansion Header pin 1
|
COM1 Header pin 7, Expansion Header pin 6
|
N/A
|
|
XUART3
|
RS232
|
FPGA
|
COM2 Header pin 2, Expansion Header pin 9
|
COM2 Header pin 3, Expansion Header pin 12
|
N/A
|
|
XUART4
|
RS485
|
FPGA
|
COM2 Header pin 1, Expansion Header pin 4
|
COM2 Header pin 6, Expansion Header pin 2
|
Used by U19
|
|
XUART5
|
RS232
|
FPGA
|
COM2 Header pin 8, DIO Header pin 5
|
COM2 Header pin 7, Expansion Header pin 10
|
N/A
|
|
XUART6
|
RS485
|
FPGA
|
COM2 Header pin 6, Expansion Header pin 2
|
COM2 Header pin 1, Expansion Header pin 4
|
Dedicated to Only RX
|
The TS-TPC-8390 has 2 USB host ports on the USB type A connector.
|
Header PIN
|
TS-Socket Location
|
Name
|
1
|
N/A
|
USB_5V
|
2
|
CN2 29
|
HOSTA_USB_M
|
3
|
CN2 31
|
HOSTA_USB_P
|
4
|
N/A
|
GND
|
|
See the TS-4700#USB Host section for more details.
This is a 2x5 pin header which can be used to bring out a USB host using a CB-USB-AF5P.
|
Header PIN
|
Function
|
1
|
USB 5V
|
2
|
USB-
|
3
|
USB+
|
4
|
GND
|
5
|
Frame
|
|
See the TS-4700#USB Host section for more details.
Note:
|
XUART0 can be switched out for the ttyS0 console port by setting the Console Enable jumper.
|