TS-4900 Ubuntu focal Getting started
From embeddedTS Manuals
The latest release is available here:
The login is either "root" with no password, or username "ubuntu" with the password "ubuntu". The ubuntu user is allowed to run sudo.
To write this to an SD card, first partition the SD card to have one large ext3, or ext4 partition. See the guide here for more information. Once it is formatted, extract this tar with:
# Assuming your SD card is /dev/sdc with one partition
mkfs.ext3 /dev/sdc1
mkdir /mnt/sd/
sudo mount /dev/sdc1 /mnt/sd/
sudo tar --numeric-owner -xjf ubuntu-armhf-20.04-latest.tar.bz2 -C /mnt/sd
sudo umount /mnt/sd
sync
To rewrite the eMMC, boot to the SD card. You cannot rewrite the emmc while it is mounted elsewhere, or used to currently boot the system. Once booted to the SD, run:
mkfs.ext3 /dev/mmcblk2p1
mkdir /mnt/emmc
mount /dev/mmcblk2p1 /mnt/emmc
wget -qO- https://files.embeddedTS.com/ts-socket-macrocontrollers/ts-4900-linux/distributions/ubuntu/ubuntu-armhf-20.04-latest.tar.bz2 | tar --numeric-owner -xj -C /mnt/emmc/
umount /mnt/emmc
sync
| Note: | The ext4 filesystem can be used instead of ext3, but it may require additional options. U-Boot does not support the 64bit addressing added as the default behavior in recent revisions of mkfs.ext4. If using e2fsprogs 1.43 or newer, the options "-O ^64bit,^metadata_csum" must be used with ext4 for proper compatibility. Older versions of e2fsprogs do not need these options passed nor are they needed for ext3. |