TS-8900-dioheader
From embeddedTS Manuals
The DIO is controlled through manipulation of the TS-8900 FPGA registers.
| 39 | 37 | 35 | 33 | 31 | 29 | 27 | 25 | 23 | 21 | 19 | 17 | 15 | 13 | 11 | 9 | 7 | 5 | 3 | 1 |
| 40 | 38 | 36 | 34 | 32 | 30 | 28 | 26 | 24 | 22 | 20 | 18 | 16 | 14 | 12 | 10 | 8 | 6 | 4 | 2 |
| Pin | Name | Notes |
|---|---|---|
| 1 | N/A | Not Connected |
| 2 | N/A | Not Connected |
| 3 | Ground | |
| 4 | N/A | Not Connected |
| 5 | N/A | Not Connected |
| 6 | N/A | Not Connected |
| 7 | N/A | Not Connected |
| 8 | N/A | Not Connected |
| 9 | SPI_MOSI | Controlled by tsctl |
| 10 | 3.3V | Do not draw more than 12mA |
| 11 | N/A | Not Connected |
| 12 | BUF_SPI_MOSI | |
| 13 | BUF_SPI_CS1# | |
| 14 | BUF_SPI_CLK | |
| 15 | 5V | |
| 16 | EXT_RESET# | Power cycle the whole board |
| 17 | N/A | Not Connected |
| 18 | Ground | |
| 19 | N/A | Not Connected |
| 20 | N/A | Not Connected |
| 21 | IN_0 | |
| 22 | N/A | Not Connected |
| 23 | IN_1 | |
| 24 | N/A | Not Connected |
| 25 | IN_2 | |
| 26 | OUT_7 | |
| 27 | IN_3 | |
| 28 | OUT_6 | |
| 29 | IN_4 | |
| 30 | OUT_5 | |
| 31 | IN_5 | |
| 32 | OUT_4 | |
| 33 | IN_6 | |
| 34 | OUT_3 | |
| 35 | IN_7 | |
| 36 | OUT_2 | |
| 37 | I2C_DAT | See tsctl for usage. |
| 38 | OUT_1 | |
| 39 | I2C_CLK | |
| 40 | OUT_0 |