TS-8820-iso485: Difference between revisions
From embeddedTS Manuals
(Created page with "The TS-8820 provides a single isolated RS-485 port on the P10 terminal block. The UART interface itself is from the CoM with the TS-8820 facilitating the ...") |
(Add note on termination jumper) |
||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
The TS-8820 provides a single isolated RS-485 port on the [[#Terminal Blocks|P10 terminal block]]. The UART interface itself is from the | The TS-8820 provides a single isolated RS-485 port on the [[#Terminal Blocks|P10 terminal block]]. The UART interface itself is from the SoM with the TS-8820 facilitating the isolated RS-485 physical interface. | ||
Optionally, a 124 ohm termination resistor can be electrically added by setting the [[#Jumpers|Term. 485 jumper]]. |
Latest revision as of 17:55, 22 September 2021
The TS-8820 provides a single isolated RS-485 port on the P10 terminal block. The UART interface itself is from the SoM with the TS-8820 facilitating the isolated RS-485 physical interface.
Optionally, a 124 ohm termination resistor can be electrically added by setting the Term. 485 jumper.