TS-8390-49xx DIO Header: Difference between revisions

From embeddedTS Manuals
No edit summary
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 22: Line 22:
|-
|-
| 5
| 5
| Not supported on the TS-4900
| /dev/ttyMAX2_RXD (RS232)
|-
|-
| 6
| 6
Line 79: Line 79:
|-
|-
| 24
| 24
| [[#DIO|GPIO 95 (EIM_D31) Output only]]
| [[#DIO|GPIO 61 (EIM_EB1) Output only]]
|-
|-
| 25
| 25
Line 103: Line 103:
|-
|-
| 32
| 32
| [[#DIO|GPIO 6 (GPIO_6) Input only]]
| [[#DIO|GPIO 47 (SD4_DAT7) Input only]]
|-
|-
| 33
| 33
| [[#DIO|GPIO 5 (GPIO_5) Input only]]
| [[#DIO|GPIO 163 (CSI0_DAT17) Input only]]
|-
|-
| 34
| 34
Line 115: Line 115:
|-
|-
| 36
| 36
| [[#DIO|GPIO 255 (GPIO_255) Input only]]
| [[#DIO|GPIO 200 (SD3_RST) Input only]]
|-
|-
| 37
| 37

Latest revision as of 14:55, 15 February 2016

The DIO header is a 0.1" pitch 2x40 header.

DIO Header Pinout
Pin Description
1 NC
2 NC
3 Ground
4 NC
5 /dev/ttyMAX2_RXD (RS232)
6 NC
7 TTL ttymxc0
8 TTL ttymxc0
9 ECSPI2 MISO
10 3.3V Supply
11 ECSPI2 CS2#
12 ECSPI2 MOSI
13 ECSPI2 CS1#
14 ECSPI2 CLK#
15 5V
16 EXT_RESET# [1]
17 GPIO 147 (CSI0_MCLK) Output only
18 Ground
19 GPIO 73 (EIM_DA9) Output only
20 GPIO 59 (EIM_LBA) Output only
21 GPIO 49 (EIM_A21) Input only
22 GPIO 55 (EIM_CS0) Output only
23 GPIO 255 (FPGA CN1-73) Input only
24 GPIO 61 (EIM_EB1) Output only
25 GPIO 128 (EIM_WAIT) Input only
26 GPIO 48 (EIM_A22) Output only
27 GPIO 226 (FPGA CN1-87) Input only
28 GPIO 166 (EIM_A23) Output only
29 GPIO 50 (EIM_A20) Input only
30 GPIO 132 (EIM_A24) Output only
31 GPIO 101 (GPIO_19) Input only
32 GPIO 47 (SD4_DAT7) Input only
33 GPIO 163 (CSI0_DAT17) Input only
34 GPIO 203 (GPIO_16) Input only
35 GPIO 72 (EIM_DA8) Output only
36 GPIO 200 (SD3_RST) Input only
37 I2C2_DAT
38 GPIO 204 (GPIO_17) Input only
39 I2C2_CLK
40 GPIO 146 (CSI0_PIXCLK) Input only
TS-8390-DIO.png
  1. ↑ Pull low to reset the CPU. Do not drive high (use open drain).
Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-8390-49xx_DIO_Header&oldid=6844"