Image File
|
Changelog
|
Known Issues
|
ts4600_7600-may232013.dd.bz2
|
|
|
ts4600_7600-sep042013-4GB.dd.bz2
|
- Added TS-8150 support.
- Added TS-8920 support.
- Implemented default splash screen, see /ts/splash
- Audio support (sgtl5000, wm8750, sii9022)
- Audio startup noise added, see /ts/startup.wav
- AutoStart X11 in the initramfs
- Configure started apps with /ts/initramfs-xinit
- Default x session changed to icewm-lite for faster boot time
- ifplugd is no longer run when jp1 is set due to race condition
- Configure the network in Debian once you are booting there
- check-usb-update implemented
- Plug in a USB drive with 1 partition containing /tsinit which will automatically run. Used primarily for production.
- Marvell Switch Chip fixes added
- Wheezy updated to latest in repository
- Added support for both onboard/offboard switches
- Used in cases such as TS-4600 + TS-8700
- Xuartctl defaults to 100hz instead of IRQ driven
- IRQ behavior is specifically tuned for best latency, but requires high CPU
- ts-sendsigs-omit script fixes so multiple nbd-clients or xuartctls are not killed early in shutdown
- Root filesystem is now always /dev/rootfs
- TS-8700 switch reset race condition fixed
- tshwctl minor fixes
- ethinfo overflow fixed
- tagmem is now only written if value actually changed with setjp/removejp/setmac
- Image sized for already shipping 4GB MicroSD cards
|
- Unionfs disabled due to kernel panics
|
ts4600_7600-nov052013-4GB.dd.bz2
|
- Added support for DoubleStore formatted SD cards
- TS-8400 support completed
- ifpulgd now starts on switch interfaces correctly
- /ts/config file create to allow for further configuration of the initramfs. See this file for more information.
- Soft Jumpers 2,3,4,5 have been removed and are implemented in the /ts/config file which allows more than 8 settings
- The config file allows enabling and configuring utilities like ifplugd, xuartctl, mdnsd, and more.
- Read only jumper 4 removed due to bugs with unionfs.
- Behavior of JP1 and JP8 are not changed
- JP7 added to minimize initramfs initialization for fastest boot.
- X11 in Debian started with correct HOME variable so a valid .Xauthority file is created
- This allows DISPLAY=:0 to work, and fixes some dns resolution issues
- /etc/init.d/motd updated to include additional information for debugging
|
|
ts4600_7600-dec022013-4GB.dd.bz2
|
- Initramfs will correctly wait for SD cards to detect, prior image created race condition potential
- On all boots, always load base USB drivers. OTG needs special load order to work properly as host (top USB port is OTG)
- resolv.conf in initramfs and Debian will correctly use DHCP assigned servers
- Removed udev persistent-net-rules that was present in previous image
- Removed /ts/fastboot that was present in previous image
|
|
ts4600_7600-jan282014-4GB.dd.bz2
|
- Updated initramfs.cpio-ts7600 to dec022013 image
- Moved getrtc so it is always run
- Fixed race condition by waiting until disk is detected
- Removed unnecessary modprobes
- Made sure USB modules get fully loaded
- Cleaned up RTC code and implemented better locking around I2C functions
- Removed unused bootdev
|
|