TS-4710 Image Changelog

This is the changelog for the software image which is shared from the TS-4710, TS-4712, TS-4720, TS-4740, TS-7700, and the TS-7250-V2.

Image File	Changelog	Known Issues
2gbsd-471x-20130221.dd.bz2	Initial release
2gbsd-471x-20130221.dd.bz2	Updates to Debian Wheezy TS specific utilities exported to Debian Including tshwctl, xuartctl, sdctl Includes busybox for vconfig and devmem Includes more baseboard support TX EN is automatically enabled on known baseboards LCD support TS-TPC-8900 support added Touchscreen supported added TS-TPC-8900 support added Initial driver for SocketCAN support added ts4700ctl revised to tshwctl for consistency among other products tshwctl adds simple support for FPGA DIO with --getdio --setdio --clrdio options tsrf2cf support added ts4700_isa16550 support added for pc104 peripherals like TS-SER4 or TS-MULTI104 smsc95xx ethernet support added Icewm removed. fullscreen-webkit added Command is ./fullscreen-webkit <url> to run a full screen browser Replaces icewm as default desktop Fixed FPGA Reload support with release of opencore Added new soft jumpers. JP2 & JP3 are baseboard specific. Controls support such as ethernet switch config JP4 enables read only mode JP5 disables network autoconfig from initramfs. This can still be set from Debian	CAN Controller currently inaccesible Second SD card not supported in sdctl smsc95xx periodically does not set MAC address correctly (already fixed in next image) mdnsd is not correctly started Debian Wheezy boot speed not yet optimized
2gbsd-471x-20130515.dd.bz2	Updated kernel. See git for the full changelog. TS-8700 support TS-8280 support Added SocketCAN support and example userspace utilities (cansend, candump, etc) Fixed FPGA reload to be reliable mdnsd started correctly fixed JP1 causing serial console to break	USB OTG not yet supported Second SD card not supported in sdctl
2gbsd-471x-20130522.dd.bz2	Updated kernel. See git for the full changelog. Added basic support for TS-4740 Fixed USB OTG support Added PCIe support	Second SD card not supported in sdctl No audio support PCIe breaks kernel register interface to FPGA
2gbsd-471x-20130531.dd.bz2	Disabled PCIe pending fixes for SMC FPGA interface Added TS-8150 support. Added TS-8920 support.	Marvell switch chip drops fragmented packets (TS-4712 only) Set MTU to 1501 on eth0 as a workaround. PCIe disabled pending fix. No Audio support Second SD card not supported in sdctl
2gbsd-471x-20130806.dd.bz2	Implemented default splash screen, see /ts/splash Audio support (sgtl5000, wm8750, sii9022) Audio startup noise added, see /ts/startup.wav AutoStart X11 in the initramfs Configure started apps with /ts/initramfs-xinit Default x session changed to icewm-lite for faster boot time ifplugd is no longer run when jp1 is set due to race condition Configure the network in Debian once you are booting there check-usb-update implemented Plug in a USB drive with 1 partition containing /tsinit which will automatically run. Used primarily for production. sdctl updated to support dual SD Start "nbd-client 127.0.0.1 7501 /dev/nbd1" to access second card Doublestore fixes added PCIe fixes included, PCIe enabled by default on suported macros with pxa168 compat-drivers included Includes common wireless drivers Marvell Switch Chip fixes added Wheezy updated to latest in repository Added support for both onboard/offboard switches Used in cases such as TS-4720 + TS-8700 Added initial TS-4740 support Uses Xilinx FPGA for reload, added spiflash tools spiflashctl added bin2coe added new tshwctl commands eMMC support TS-4720 support added Generates random MAC address if none is programmed. Should only be used for production Added Kexec support Allows support for NFS/http/ftp/etc kernel and rootfs loading Xuartctl defaults to 100hz instead of IRQ driven IRQ behavior is specifically tuned for best latency, but requires high CPU Debian Wheezy configured to continue booting in the event of a fsck error unless it is completely unrepairable ts-sendsigs-omit script fixes so multiple nbd-clients or xuartctls are not killed early in shutdown Root filesystem is now always /dev/rootfs rather than /dev/nbd0p2 TS-4740/TS-4720 can boot to /dev/nbd1p2, so the actual rootfs is automatically symlinked to /dev/rootfs	Unionfs crashes with a kernel oops when JP4 is enabled.
2gbsd-471x-20130815.dd.bz2	TS-8700 switch reset race condition fixed Fixed FPGA reload for TS-4712/20 tshwctl minor fixes ethinfo overflow fixed tagmem is now only written if value actually changed with setjp/removejp/setmac	Unionfs crashes with a kernel oops when JP4 is enabled.
4gbsd-471x-20131004.dd.bz2	Switched to EXT3 by default Doublestore users should disable journaling to reduce writes vs old ext2 Image sized for already shipping 4GB MicroSD cards TS-8400 support completed ifpulgd now starts on switch interfaces correctly /ts/config file create to allow for further configuration of the initramfs. See this file for more information. Soft Jumpers 2,3,4,5 have been removed and are implemented in the /ts/config file which allows more than 8 settings The config file allows enabling and configuring utilities like ifplugd, xuartctl, mdnsd, and more. Read only jumper 4 removed due to bugs with unionfs. Behavior of JP1 and JP8 are not changed JP7 added to minimize initramfs initialization for fastest boot. Reloading the TS-4712 and TS-4720 now resets the model number correctly after a soft reload X11 in Debian started with correct HOME variable so a valid .Xauthority file is created This allows DISPLAY=:0 to work, and fixes some dns resolution issues /etc/init.d/motd updated to include additional information for debugging tshwctl updated TS-7700 EVGPIO (getdio/setdio/clrdio) added --getdio is fixed which would previously change the direction for all DIO in the first register when used (DIO 0-15) --rtcinfo implemented which provides more status information on the RTC Kernel updated Included commonly requested features in default config Bluetooth, ipv6, netfilter (iptables), bridging, and more device support. wm8750 support added for TS-8400 sgtl5000 supports an option to disable standby to prevent audible pops See git for the full changelog.	Unionfs support disabled
4gbsd-471x-20140306.dd.bz2	Fixed rare reboot lockup Added Marvell switch chip errata fix for 10Mb/s ethernet Added minimum packet size for TS-4712/TS-4720 to work around corrupt FCS from switch chip Added TS-4720 support Added TS-4740 support
4gbsd-471x-20140430.dd.bz2	Initial TS-7250-V2 support Initramfs now prints boot device on TS-7250-V2 and TS-4720 Initramfs zeroconf/ipv4ll IP is now only used as a fallback if dhcp fails Fixes mdns resolving zeroconf to a system with no route to it Updated tshwctl with rtcinfo, and 7250v2 dio/adc support Updated sdctl for 7250v2 Debian updated with empty killprocs script Normal killprocs ignores debians list of processes not to kill which kills the nbd-client Empty killprocs will succeed these updates, but not restart processes	USB WiFi modules not compiled with the kernel. USB WiFi will not work, and requires a kernel compile and rebuilding the modules as outlined in the Compile the Kernel section.
* 4gbsd-471x-20140724.dd.bz2	Fixed TS-7250-V2 ADCs Fixed 16550 driver for 7250v2 Fixed USB WIFI module regression eMMC on 7250v2 is now converted to SLC. new image available 2gb-emmc-slc-471x-latest.dd.bz2 Enabled /dev/i2c interface in the default kernel Added new CFG options CFG_MUTE_CPU_UART=1 will completely disable output on /dev/ttyS0 after the bootrom messages CFG_XUART_CONSOLE_EN=<0-7> will use an XUART for console instead of /dev/ttyS0	* EVGPIO IRQ #2 requires a build from the latest kernel sources
* 4gbsd-471x-3x-20140828.dd.bz2	This is a beta image, and not relinked to the -latest image. New 3.14.16 kernel Fixed ts_lcd which would incorrectly attempt to load calibration from tagmem which is no longer used. Fixed udev bug which broke keyboards & mice on x11 Fixed with this on older systems: echo "SUBSYSTEM==\"input\", ENV{ID_INPUT}==\"\", IMPORT{builtin}=\"input_id\"" >> /etc/udev/rules.d/50-udev-default.rules	USB OTG host does not work. The 1 CPU USB host still works. PCIe, and intel I210 (TS-4740) support not yet functional. Muxed IRQs (PC104, CAN, optionally XUART) currently do not work.
* 4gbsd-471x-20140924.dd.bz2	Using older images if multiple copies of tshwctl are run at the same time which access tagmem, this can corrupt the mac address and the soft jumpers. In some cases this could also break the touchscreen loading random data as calibration. This new tshwctl includes locking that will prevent multiple copies from accessing tagmem simultaneously. Removed udev rule that allocates eth# to a mac address