75xx bitstreams: Difference between revisions
From embeddedTS Manuals
No edit summary |
(Added link to pre-built bitstreams) |
||
Line 5: | Line 5: | ||
ts7500ctl --loadfpga bitstream.vme.gz | ts7500ctl --loadfpga bitstream.vme.gz | ||
</source> | </source> | ||
A list of our pre-built bitstreams can be found on our [ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7500-linux/binaries/ts-bitstreams/ FTP site] | |||
If we do not have a configuration you need, you can [[#FPGA Programming|build a new bitstream]], or [http://www.embeddedarm.com/support/contact-us.php contact us] for our engineering services. | If we do not have a configuration you need, you can [[#FPGA Programming|build a new bitstream]], or [http://www.embeddedarm.com/support/contact-us.php contact us] for our engineering services. |
Revision as of 14:54, 9 June 2014
The FPGA has the capability to be reloaded on startup and reprogram itself with different configurations. The default bitstream is hardcoded into the FPGA, but the soft reloaded bitstreams can be placed in /ts7500_bitstream.vme.gz on the initrd root to make the board load the bitstream on startup. You can also load the bitstream manually using ts7500ctl:
ts7500ctl --loadfpga bitstream.vme
# or
ts7500ctl --loadfpga bitstream.vme.gz
A list of our pre-built bitstreams can be found on our FTP site
If we do not have a configuration you need, you can build a new bitstream, or contact us for our engineering services.