Baseboard ID: Difference between revisions

From embeddedTS Manuals
(Created page with "All of our default baseboards contain a hard wired 3-state 8-input multiplexers. This is not required to implement in custom baseboards, but it can be useful to identify the ...")
 
No edit summary
Line 1: Line 1:
All of our default baseboards contain a hard wired 3-state 8-input multiplexers.  This is not required to implement in custom baseboards, but it can be useful to identify the board in software.  During startup of the macrocontroller 4 DIO are used to obtain the baseboard model id.  The red LED (CN2_06) is state 0, green LED (CN2_08) is state 1, BUS_DIR (CN1_98), and BD_ID_DATA (CN1_83) are used for this purpose.
All of our default baseboards contain a hard wired 3-state 8-input multiplexers.  This is not required to implement in custom baseboards, but it can be useful to identify the board in software.  During startup of the macrocontroller 4 DIO are used to obtain the baseboard model id.  The red LED (CN2_06) is state 0, green LED (CN2_08) is state 1, BUS_DIR (CN1_98), and BD_ID_DATA (CN1_83) are used for this purpose.


[File:BoardID.png|right|300px|TS-8160 baseboard ID resulting in ID 6.]
[[File:BoardID.png|right|300px|TS-8160 baseboard ID resulting in ID 6.]]

Revision as of 10:28, 10 January 2013

All of our default baseboards contain a hard wired 3-state 8-input multiplexers. This is not required to implement in custom baseboards, but it can be useful to identify the board in software. During startup of the macrocontroller 4 DIO are used to obtain the baseboard model id. The red LED (CN2_06) is state 0, green LED (CN2_08) is state 1, BUS_DIR (CN1_98), and BD_ID_DATA (CN1_83) are used for this purpose.

TS-8160 baseboard ID resulting in ID 6.