Baseboard ID: Difference between revisions
From embeddedTS Manuals
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
All of our default baseboards contain a hard wired 3-state 8-input multiplexers. This is not required to implement in custom baseboards, but it can be useful to identify the board in software. During startup of the macrocontroller 4 DIO are used to obtain the baseboard model id. The red LED (CN2_06) is state 0, green LED (CN2_08) is state 1, BUS_DIR (CN1_98), and BD_ID_DATA (CN1_83) are used for this purpose. | All of our default baseboards contain a hard wired 3-state 8-input multiplexers. This is not required to implement in custom baseboards, but it can be useful to identify the board in software. During startup of the macrocontroller 4 DIO are used to obtain the baseboard model id. The red LED (CN2_06) is state 0, green LED (CN2_08) is state 1, BUS_DIR (CN1_98), and BD_ID_DATA (CN1_83) are used for this purpose. | ||
{|class=wikitable | |||
|+ TS-Baseboard IDs | |||
! ID | |||
! Baseboard | |||
|- | |||
| 2 | |||
| [[TS-TPC-8390]] | |||
|- | |||
| 6 | |||
| [[TS-8160]] | |||
|- | |||
| 7 | |||
| [[TS-8100]] | |||
|- | |||
| 10 | |||
| [[TS-TPC-8900]] | |||
|- | |||
| 255 | |||
| [[TS-8200]] | |||
|} | |||
[[File:BoardID.png|right|360px|thumb|TS-8160 baseboard ID resulting in ID 6.]] | [[File:BoardID.png|right|360px|thumb|TS-8160 baseboard ID resulting in ID 6.]] |
Revision as of 10:32, 10 January 2013
All of our default baseboards contain a hard wired 3-state 8-input multiplexers. This is not required to implement in custom baseboards, but it can be useful to identify the board in software. During startup of the macrocontroller 4 DIO are used to obtain the baseboard model id. The red LED (CN2_06) is state 0, green LED (CN2_08) is state 1, BUS_DIR (CN1_98), and BD_ID_DATA (CN1_83) are used for this purpose.
ID | Baseboard |
---|---|
2 | TS-TPC-8390 |
6 | TS-8160 |
7 | TS-8100 |
10 | TS-TPC-8900 |
255 | TS-8200 |