Baseboard ID: Difference between revisions
From embeddedTS Manuals
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
All of our default baseboards contain a hard wired 3-state 8-input multiplexers. This is not required to implement in custom baseboards, but it can be useful to identify the board in software. During startup of the macrocontroller 4 DIO are used to obtain the baseboard model id. The red LED (CN2_06) is state 0, green LED (CN2_08) is state 1, BUS_DIR (CN1_98), and BD_ID_DATA (CN1_83) are used for this purpose. | All of our default baseboards contain a hard wired 3-state 8-input multiplexers. This is not required to implement in custom baseboards, but it can be useful to identify the board in software. During startup of the macrocontroller 4 DIO are used to obtain the baseboard model id. The red LED (CN2_06) is state 0, green LED (CN2_08) is state 1, BUS_DIR (CN1_98), and BD_ID_DATA (CN1_83) are used for this purpose. | ||
[[File:BoardID.png|360px|thumb|TS-8160 baseboard ID resulting in ID 6.]] | |||
{|class=wikitable | {|class=wikitable | ||
Line 8: | Line 10: | ||
| 2 | | 2 | ||
| [[TS-TPC-8390]] | | [[TS-TPC-8390]] | ||
|- | |||
| 4 | |||
| [[TS-8500]] | |||
|- | |- | ||
| 6 | | 6 | ||
Line 21: | Line 26: | ||
| [[TS-8200]] | | [[TS-8200]] | ||
|} | |} | ||
Revision as of 10:34, 10 January 2013
All of our default baseboards contain a hard wired 3-state 8-input multiplexers. This is not required to implement in custom baseboards, but it can be useful to identify the board in software. During startup of the macrocontroller 4 DIO are used to obtain the baseboard model id. The red LED (CN2_06) is state 0, green LED (CN2_08) is state 1, BUS_DIR (CN1_98), and BD_ID_DATA (CN1_83) are used for this purpose.
ID | Baseboard |
---|---|
2 | TS-TPC-8390 |
4 | TS-8500 |
6 | TS-8160 |
7 | TS-8100 |
10 | TS-TPC-8900 |
255 | TS-8200 |