Debian Buster Network: Difference between revisions
From embeddedTS Manuals
(fix missing EOF) |
(Expand example) |
||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
A file with the name of each network device to be configured is placed in /etc/network/interfaces.d/. The example below demonstrates configuration and use of the wired Ethernet device 'eth0'. For complete documentation, see [https://wiki.debian.org/NetworkConfiguration Debian's documentation here] | |||
Some common examples are shown below. | Some common examples are shown below. | ||
Line 5: | Line 5: | ||
DHCP on eth0: | DHCP on eth0: | ||
<source lang=bash> | <source lang=bash> | ||
cat > /etc/network/interfaces.d/eth0 <<EOF | |||
auto eth0 | auto eth0 | ||
allow-hotplug eth0 | allow-hotplug eth0 | ||
Line 14: | Line 14: | ||
Static IP on eth0: | Static IP on eth0: | ||
<source lang=bash> | <source lang=bash> | ||
cat > /etc/network/interfaces.d/eth0 <<EOF | |||
auto eth0 | auto eth0 | ||
iface eth0 inet static | iface eth0 inet static | ||
Line 20: | Line 20: | ||
gateway 192.0.2.254 | gateway 192.0.2.254 | ||
EOF | EOF | ||
</source> | |||
The network can then be brought up with the command: | |||
<source lang=bash> | |||
ifup eth0 | |||
</source> | </source> |
Latest revision as of 14:09, 13 September 2020
A file with the name of each network device to be configured is placed in /etc/network/interfaces.d/. The example below demonstrates configuration and use of the wired Ethernet device 'eth0'. For complete documentation, see Debian's documentation here
Some common examples are shown below.
DHCP on eth0:
cat > /etc/network/interfaces.d/eth0 <<EOF
auto eth0
allow-hotplug eth0
iface eth0 inet dhcp
EOF
Static IP on eth0:
cat > /etc/network/interfaces.d/eth0 <<EOF
auto eth0
iface eth0 inet static
address 192.0.2.7/24
gateway 192.0.2.254
EOF
The network can then be brought up with the command:
ifup eth0