Generic TS-Socket
From embeddedTS Manuals
The TS-SOCKET macrocontrollers all use two high density 100 Pin connectors which are rated for about 100 insertions. Take care to not wear out this connector. If you are to be inserting and removing the modules from the base boards, you may want to consider placing a wear-out board with mating connectors in between the base board and the modules so it can easily thrown out and replaced with a new one.
| WARNING: | The TS-SOCKET Connectors are only rated for 100 insertions. |
Be sure to take appropriate Electrostatic Discharge (ESD) precautions. Disconnect the power source before moving, cabling, or performing any set up procedures.
| WARNING: | Inappropriate handling may cause damage to the board. |
We also provide an EagleCad Library for use in developing your own baseboard.