Image replicator media uboot imx6ul ng: Difference between revisions
From embeddedTS Manuals
(Initial creation) |
(Typo in name) |
||
| Line 2: | Line 2: | ||
! style="width: 8%"|U-Boot | ! style="width: 8%"|U-Boot | ||
| style="width: 12%" | | | style="width: 12%" | | ||
<code>/u-boot-dtb. | <code>/u-boot-dtb.bin</code> | ||
</p> | </p> | ||
<code>/SPL</code> | <code>/SPL</code> | ||
| style="width: 80%" | U-Boot binary blob. This will be written to the bootloader area of eMMC. Note that '''both''' files are required for U-Boot, if either file is missing then the Image Replicator tool will not write either of them. If the file <code>/SPL.md5</code> is present on the USB drive, this will be used to verify the data written to disk. | | style="width: 80%" | U-Boot binary blob. This will be written to the bootloader area of eMMC. Note that '''both''' files are required for U-Boot, if either file is missing then the Image Replicator tool will not write either of them. If the file <code>/SPL.md5</code> is present on the USB drive, this will be used to verify the data written to disk. | ||
|} | |} | ||
Latest revision as of 12:30, 17 November 2023
| U-Boot |
|
U-Boot binary blob. This will be written to the bootloader area of eMMC. Note that both files are required for U-Boot, if either file is missing then the Image Replicator tool will not write either of them. If the file /SPL.md5 is present on the USB drive, this will be used to verify the data written to disk.
|
|---|