TS-12W

From embeddedTS Manuals
Revision as of 16:38, 17 January 2022 by Lionel (talk | contribs) (Links auto-updated for 2022 re-branding ( http://www.embeddedarm.com/products/board-detail.php?product=TS-12W →‎ http://www.embeddedTS.com/products/board-detail.php?product=TS-12W https://cdn.embeddedarm.com/resource-attachments/ts-12w-schematic.pdf →‎ https://cdn.embeddedTS.com/resource-attachments/ts-12w-schematic.pdf))
TS-12W
TS-12W.jpg
Released Mar. 2004
Product Page
Documents
Schematic
Power Requirements
Up to 2.4 Amps @ +5V DC
Operating Temperature
Cold -40C
Hot 85C
Mechanical
22.5mm X 90mm X 100mm (W x H x D)

Overview

The TS-12W is a 12 watt power supply that provides regulated +5 VDC to a single board computer via the PC/104 bus. Two PC/104 mounting holes are provided to allow the TS-12W to be positioned as the top board on the PC/104 stack and provide power to the entire stack. Safety features include over-current limit, thermal shutdown and reverse polarity protection. Ferrite beads and capacitor filters allow the TS-12W coupled with a single board computer to operate well in industrial environments. The LED indicates status of +5 VDC output.

Features

  • LED to indicate status of +5VDC output
  • Regulated +5VDC is provided to a single board computer via the PC/104 bus (2.4 Amps max)
  • Remote shutdown input allows external control of +5VDC output voltage.
    • TTL compatible input:
      • Logic 1 = 5 volt off
      • Logic 0 = 5 volt on
      • Open = 5 vold on
  • Highly efficient switching power supply produces very low heat
  • Lockout circuit prevents operation when input voltage is below 10VDC
  • Reverse polarity protection and ferrite noise suppression
  • 10-340VDC input voltage has quick disconnect with screw terminals