TS-4100 ADC: Difference between revisions
From embeddedTS Manuals
(Blanked the page) Tag: Blanking |
No edit summary |
||
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
This board supports two 12-bit ADC inputs using the i.MX6UL CPU's integrated ADC. | |||
All of these inputs can sample 0-3.3 VDC intrinsically or 4-20 mA with the necessary hardware in place. | |||
{{Note|An external resistor will need to be added in order to enable the 4-20 mA measurements.}} | |||
These ADCs are accessed through the [https://wiki.analog.com/software/linux/docs/iio/iio Linux Industrial I/O Subsystem] (IIO), which provides sample rates up to 6ksps across all inputs. | |||
The simplest API it offers for slow speed acquisition is via [https://en.wikipedia.org/wiki/Sysfs sysfs] (/sys): | |||
<source lang=bash> | |||
cat /sys/bus/iio/devices/iio:device0/in_voltage{1,9}_raw | |||
</source> | |||
The pin assignments and names for accessing each ADC input are: | |||
{|class=wikitable | |||
! Schematic Name | |||
! i.MX6UL ADC Signal | |||
! CN2 Terminal Pin | |||
! IIO name | |||
|- | |||
| GPIO_1_ADC | |||
| ADC1_IN1 | |||
| 12 | |||
| voltage1 | |||
|- | |||
| GPIO_9_ADC | |||
| ADC1_IN9 | |||
| 91 | |||
| voltage9 | |||
|} | |||
{{Note|Each baseboards breakout implementation of these two ADC pins will differ.}} |
Latest revision as of 19:25, 15 June 2020
This board supports two 12-bit ADC inputs using the i.MX6UL CPU's integrated ADC. All of these inputs can sample 0-3.3 VDC intrinsically or 4-20 mA with the necessary hardware in place.
Note: | An external resistor will need to be added in order to enable the 4-20 mA measurements. |
These ADCs are accessed through the Linux Industrial I/O Subsystem (IIO), which provides sample rates up to 6ksps across all inputs. The simplest API it offers for slow speed acquisition is via sysfs (/sys):
cat /sys/bus/iio/devices/iio:device0/in_voltage{1,9}_raw
The pin assignments and names for accessing each ADC input are:
Schematic Name | i.MX6UL ADC Signal | CN2 Terminal Pin | IIO name |
---|---|---|---|
GPIO_1_ADC | ADC1_IN1 | 12 | voltage1 |
GPIO_9_ADC | ADC1_IN9 | 91 | voltage9 |
Note: | Each baseboards breakout implementation of these two ADC pins will differ. |