TS-4100 FPGA

The TS-4100 FPGA registers are accessed over I2C. The /sys/class/gpio driver provides access to the IO using these registers. See the #GPIO section for more information on the recommended method for IO access.

The FPGA is available at I2C addresses 0x28-0x2f. First write the address which is 16-bits, followed by the data which is 8-bits.

The first registers 0-127 are used to control the GPIO. Registers 128-255 control the crossbar for the various pins. Use the IO offsets int the second table for the GPIO and CROSSBAR registers.

GPIO_n Register

Address	Bits	Description
0-127	7:3	Reserved (Write 0)
	2	GPIOn Input Data
	1	GPIOn Output Data
	0	GPIOn Output Enable
128-255	7	CROSSBARn GPIO mode
	6:0	CROSSBARn Value
256-271	7:0	GPIOn Bank Input
272-287	7:0	GPIOn Bank Output Data
288-303	7:0	GPIOn Bank Output Enable (1=out)
304	7:0	Model Number MSB (0x41)
305	7:0	Model Number LSB (0x00)
306	7:0	FPGA Rev
307-8191	7:0	Reserved
8192-16384	7:0	ZPU RAM access

In the above table the GPIO, Crossbar, and Bank registers will use the following IO. The bank registers should divide the IO number by 8 to get the offset, and use the modulus to get the bit number.

FPGA IO

IO Number	Pad	Crossbar support	Direction
1	SPARE_1_PAD	Y	GPIO
2	SPARE_2_PAD	Y	GPIO
3	SPARE_3_PAD	Y	GPIO
4	SPARE_4_PAD	Y	GPIO
5	UART3_TXD_PAD (ttymxc2)	Y	Input
6	UART3_RTS_PADn (ttymxc2)	Y	Input
7	UART4_TXD_PAD (ttymxc3)	Y	Input
8	UART7_TXD_PAD (ttymxc6)	Y	Input
9	UART3_RXD_PAD	Y	Output
10	UART3_CTS_PAD	Y	Output
11	UART4_RXD_PAD	Y	Output
12	UART7_RXD_PAD	Y	Output
13	WIFI_RXD_PAD	Y	Input
14	WIFI_RTS_PAD	Y	Input
15	WIFI_IRQ_PADN	Y	Input
16	WIFI_TXD_PAD	Y	Output
17	WIFI_CTS_PAD	Y	Output
18	ZPU_BREAK	N	Input
19	ZPU_RESET	N	Output
20	EN_WIFI_PWR_PAD	DIO	Output
21	WIFI_RESET_PAD	DIO	Output
22	EN_USB_HOST_5V_PAD	DIO	Output
23	EN_LCD_3V3_PAD	DIO	Output
24	EN_SD_POWER_PAD	DIO	Output
25	OFF_BD_RESET_PADN	DIO	Output
26	EN_SW_3V3_PAD	DIO	Output
27	GREEN_LED_PADN	DIO	Output
28	RED_LED_PADN	DIO	Output
29	UART_A_RXD_PAD	UART+Spares	GPIO
30	UART_B_RXD_PAD	UART+Spares	GPIO
31	UART_C_RXD_PAD	UART+Spares	GPIO
32	UART_D_RXD_PAD	UART+Spares	GPIO
33	UART_A_TXD_PAD	UART+Spares	GPIO
34	UART_B_TXD_PAD	UART+Spares	GPIO
35	UART_C_TXD_PAD	UART+Spares	GPIO
36	UART_D_TXD_PAD	UART+Spares	GPIO
37	DIO_0	UART+SPARE pins	GPIO
38	DIO_1	UART+SPARE pins	GPIO
39	DIO_2	UART+SPARE pins	GPIO
40	DIO_3	UART+SPARE pins	GPIO
41	DIO_4	UART+SPARE pins	GPIO
42	DIO_5	UART+SPARE pins	GPIO
43	DIO_6	UART+SPARE pins	GPIO
44	DIO_7	UART+SPARE pins	GPIO
45	DIO_8	UART+SPARE pins	GPIO
46	DIO_9	UART+SPARE pins	GPIO
47	DIO_10	UART+SPARE pins	GPIO
48	DIO_11	UART+SPARE pins	GPIO
49	DIO_12	UART+SPARE pins	GPIO
50	DIO_13	UART+SPARE pins	GPIO
51	DIO_14	UART+SPARE pins	GPIO
52	DIO_15	UART+SPARE pins	GPIO
53	DIO_16	UART+SPARE pins	GPIO
54	DIO_17	UART+SPARE pins	GPIO
55	DIO_18	UART+SPARE pins	GPIO
56	DIO_19	UART+SPARE pins	GPIO
57	DIO_20	UART+SPARE pins	GPIO
58	DIO_21	UART+SPARE pins	GPIO
59	DIO_22	UART+SPARE pins	GPIO
60	DIO_23	UART+SPARE pins	GPIO
61	DIO_24	UART+SPARE pins	GPIO
62	DIO_25	UART+SPARE pins	GPIO
63	DIO_26	UART+SPARE pins	GPIO
64	DIO_27	UART+SPARE pins	GPIO
65	DIO_28	UART+SPARE pins	GPIO
66	DIO_29	UART+SPARE pins	GPIO
67	DIO_30	UART+SPARE pins	GPIO
68	DIO_31	UART+SPARE pins	GPIO
69	DIO_32	UART+SPARE pins	GPIO
70	DIO_33	UART+SPARE pins	GPIO
71	DIO_34	UART+SPARE pins	GPIO
72	DIO_35	UART+SPARE pins	GPIO
73	DIO_36	UART+SPARE pins	GPIO
74	DIO_37	UART+SPARE pins	GPIO
75	DIO_38	UART+SPARE pins	GPIO
76	DIO_39	UART+SPARE pins	GPIO
77	DIO_40	UART+SPARE pins	GPIO
78	DIO_41	UART+SPARE pins	GPIO
79	DIO_42	UART+SPARE pins	GPIO
80	DIO_43	UART+SPARE pins	GPIO
81	DIO_44	UART+SPARE pins	GPIO
82	DIO_45	UART+SPARE pins	GPIO
83	DIO_46	UART+SPARE pins	GPIO