TS-4710 PC104: Difference between revisions
From embeddedTS Manuals
No edit summary |
No edit summary |
||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
You can use the included ts4700_isa16550 driver to load support for various devices such as the [[TS-IRIDIUM]], or [[TS-MULTI-104]]. | |||
For example, to load a single device: | For example, to load a single device: | ||
Line 7: | Line 7: | ||
</source> | </source> | ||
If you are loading multiple devices, you can specify the COM and IRQ in a single command: | If you are loading multiple devices, you can specify the COM and IRQ in a single command. For example, to set up a [[TS-SER4]] with only jumpers IRQ4, IRQ2, and COM1 set: | ||
<source lang=bash> | <source lang=bash> | ||
modprobe ts4700_isa16550 irq=6,6,6,6 com=0x3f8,0x2f8,0x3e8,0x2e8 | |||
modprobe ts4700_isa16550 com=0x3f8,0x2f8 | |||
</source> | </source> | ||
Latest revision as of 17:29, 21 November 2014
You can use the included ts4700_isa16550 driver to load support for various devices such as the TS-IRIDIUM, or TS-MULTI-104.
For example, to load a single device:
# Assumes COM1 and IRQ7 jumpers are set
modprobe ts4700_isa16550 com=0x3f8 irq=7
If you are loading multiple devices, you can specify the COM and IRQ in a single command. For example, to set up a TS-SER4 with only jumpers IRQ4, IRQ2, and COM1 set:
modprobe ts4700_isa16550 irq=6,6,6,6 com=0x3f8,0x2f8,0x3e8,0x2e8
This driver assumes the PC104 base is at 0x0 of the muxbus, but some baseboards such as the TS-8900 use another offset for PC104. This can be specified with the iobase argument:
modprobe ts4700_isa16550 com=0x3f8 irq=7 iobase=0x81008800