TS-4720 eMMC Backup/restore: Difference between revisions
From embeddedTS Manuals
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
{| | {| | ||
| [[File:eMMC.png|70px|link=ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4710-linux/binaries/ts-images/emmc-dblstor-latest.dd.bz2]] | | [[File:eMMC.png|70px|link=ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4710-linux/binaries/ts-images/emmc-dblstor-latest.dd.bz2]] | ||
| [ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4710-linux/binaries/ts-images/emmc-dblstor-latest.dd.bz2 Click to download the latest 4GB | | [ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4710-linux/binaries/ts-images/emmc-dblstor-latest.dd.bz2 Click to download the latest 4GB eMMC image.] | ||
|} | |} | ||
Revision as of 10:58, 10 June 2014
Click to download the latest 4GB eMMC image. |
WARNING: | Make sure the SD and eMMC filesystems are mounted read only while writing any images. If dd is used to read or write a disk while a filesystem on it is mounted read/write this can result in a corrupt image. |
First boot to the initramfs. These steps should not be run from the full Debian environment, so to get back to the initramfs, first run:
tshwctl --removejp 1 && reboot
Once you are in the initramfs, mount a network share or usb drive containing the emmc image.
Write an Image to eMMC
# Check /mnt/root. If it shows a file "root.version", you can proceed.
# If it shows nothing, you need to wait for the Debian filesystem
until [ -e /mnt/root/root.version ]; do sleep .1; done
# Plug in a thumbdrive formatted with ext2/3/4 or fat32/ntfs
mkdir /mnt/usbdev
mount -o ro /dev/sda1 /mnt/usbdev
umount -l /mnt/root/
# Tell sdctl to pause so we don't kill it during a burst
killall -USR1 sdctl
# Allow time for any buffered writes to finish
sleep 5
killall sdctl
# The dblstor-disable command only tells the card to
# ignore any doublestore metadata on the eMMC during
# this write. It does not prevent reading/writing doublestore
# formatted media.
# This command can be expected to take about 10 minutes
sdctl --lun 1 -z 65536 --dblstor-disable -i /mnt/usbdev/emmc-image.dd
reboot
These steps can write the eMMC image to use a single-card #Doublestore, or you can write the SD Image] to not use doublestore.
Save an image from eMMC
# Check /mnt/root. If it shows a file "root.version", you can proceed.
# If it shows nothing, you need to wait for the Debian filesystem
until [ -e /mnt/root/root.version ]; do sleep .1; done
# Plug in a thumbdrive formatted with ext2/3/4 or fat32
mkdir /mnt/usbdev
mount /dev/sda1 /mnt/usbdev
umount -l /mnt/root/
# Tell sdctl to pause so we don't kill it during a burst
killall -USR1 sdctl
# Allow time for any buffered writes to finish
sleep 5
killall sdctl
sdctl --lun 1 -z 65536 --dblstor-disable --nbdserver lun1:disc
nbd-client 127.0.0.1 7500 /dev/nbd1
# This can take about 15 minutes
dd if=/dev/nbd1 bs=4M of=/mnt/usbdev/emmc-image.dd
umount /mnt/usbdev
sync