TS-4800 USB Device: Difference between revisions
(Created page with "The USB Mass Storage Device Linux USB gadget will allow you to use your board as a storage device, like a USB thumb drive, when connected to a host PC. Subsequently, the CPU c...") |
m (FTP links auto-updated (ftp://ftp.embeddedarm.com/ → https://files.embeddedarm.com/)) |
||
Line 3: | Line 3: | ||
The IP over USB (A.K.A. USB Ethernet) Linux USB gadget will allow you to connect to your board with a USB cable from a PC like you would with a CAT5 Ethernet cable. You will have access to the board via the TCP/IP connection allowing you to use any networking utility (e.g. ping, ssh, ftp, http, etc). | The IP over USB (A.K.A. USB Ethernet) Linux USB gadget will allow you to connect to your board with a USB cable from a PC like you would with a CAT5 Ethernet cable. You will have access to the board via the TCP/IP connection allowing you to use any networking utility (e.g. ping, ssh, ftp, http, etc). | ||
For Windows, a driver interface configuration file (linux.inf) will need to be downloaded and installed on the host PC. This procedure is described in detail below. The linux.inf file can be downloaded [ | For Windows, a driver interface configuration file (linux.inf) will need to be downloaded and installed on the host PC. This procedure is described in detail below. The linux.inf file can be downloaded [https://files.embeddedarm.com/ts-arm-sbc/ts-7500-linux/USB_gadget/linux.inf here]. |
Revision as of 09:38, 12 January 2021
The USB Mass Storage Device Linux USB gadget will allow you to use your board as a storage device, like a USB thumb drive, when connected to a host PC. Subsequently, the CPU can access the saved data through the storage element named usb_storage_file.
The IP over USB (A.K.A. USB Ethernet) Linux USB gadget will allow you to connect to your board with a USB cable from a PC like you would with a CAT5 Ethernet cable. You will have access to the board via the TCP/IP connection allowing you to use any networking utility (e.g. ping, ssh, ftp, http, etc).
For Windows, a driver interface configuration file (linux.inf) will need to be downloaded and installed on the host PC. This procedure is described in detail below. The linux.inf file can be downloaded here.