TS-4900 QT5 IDE Setup

Note:

This guide is intended for our stock image using systemd, but you are using a custom images the directions should apply if you rebuild with your own yocto toolchain (meta-toolchain-qt5), and update the paths if you are using a different distribution.

Install qtcreator. The version from a recent Linux distribution should be fine. In a debian/Ubuntu desktop, run:

sudo apt-get update && sudo apt-get install qtcreator

You will also need to download the SDK which includes the QT support:

• i686
• x86_64

Start QT Creator and go to Tools->Options. In the left column of the Options menu, select "Build & Run". Start with the "QT Versions" tab, and click "Add" in the upper right to configure the TS-4900. In our default SDK on x86_64 this is "/opt/poky-systemd/1.6.1/sysroots/x86_64-pokysdk-linux/usr/bin/qt5/qmake". If you're using the x86 toolchain, "/opt/poky-systemd/1.6.1/sysroots/x86-pokysdk-linux/usr/bin/qt5/qmake".

Next go to the "Compilers" tab, and click "Add", and select "GCC". Set the Name to "TS-4900 GCC". For the "Compiler Path":

• X86
  • /opt/poky-systemd/1.6.1/sysroots/i686-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-g++
• X86_64
  • /opt/poky-systemd/1.6.1/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-g++

Next, go to the Debuggers tab, and click "Add". For name, specify "TS-4900 GDB". For the paths, specify the location of gdb:

• X86
  • "/opt/poky-systemd/1.6.1/sysroots/i686-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-gdb"
• X86_64
  • /opt/poky-systemd/1.6.1/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-gdb