TS-4900 QT5 IDE Setup
| Note: | This guide is intended for our stock image using systemd. On custom images the directions should apply if a toolchain is compiled. bitbake meta-toolchain-qt5, and update the paths if you are using a different distribution. |
Install qtcreator. The version from a recent Linux distribution should be fine. In a debian/Ubuntu desktop, run:
sudo apt-get update && sudo apt-get install qtcreator -y
You will also need to download the SDK which includes the QT support (Right click and save as):
You can install these with:
sudo bash ./poky-*.sh
These instructions assume the path will be default at "/opt/poky/2.2.1/".
An environment script has to be sourced ***every time*** before launching qtcreator. Without this builds will fail.
source /opt/poky/2.2.1/environment-setup-cortexa9hf-neon-poky-linux-gnueabi
qtcreator
Next we need to configure QT Creator to build using this toolchain. When QT creator launches and go to Tools->Options, and select Devices. Click "Add" and select "Generic Linux Device" and click "Start Wizard".
 |
On the next page specify the ip address or hostname to the system. In this example, the board has a dhcp address of 192.168.2.45. The default Yocto image will use "root" with no password to connect. Set the name to TSIMX6.
 |
It will then verify connectivity. Click close and continue.
 |
| Note: | If this returns an error: "SSH connection failure: SSH Protocol error: Server and client capabilities don't match. Client list was: aes128-cbc,3des-cbc.
Server list was chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com.". If this happens connect to the board's console and edit /etc/ssh/sshd_config and append the line "Ciphers +aes128-cbc". Reset sshd, or reboot the board and try again. Upgrading Qt Creator may also resolve this issue. |
| Note: | The paths given in the images may not match the latest toolchain, but are meant to show where these values would go. Follow the text appropriate to the architecture of your host pc for the correct values |
Next, in the left column of the Options menu, select "Build & Run". Start with the "QT Versions" tab, and click "Add" in the upper right to configure the TS Kit. QT creator may see the "qmake" binary added to your path from the sourced environment script. If this is detected add in the string "TSIMX6" to the title, or add the path below. This will allow it to be recognized when setting the right binary for the kit.
| i686 | /opt/poky/2.2.1/sysroots/x86-pokysdk-linux/usr/bin/qt5/qmake
|
| x86_64 | /opt/poky/2.2.1/sysroots/x86_64-pokysdk-linux/usr/bin/qt5/qmake
|
 |
Next go to the "Compilers" tab, and click "Add", and select "GCC". Set the Name to "TSIMX6 GCC". For the "Compiler Path":
| i686 | /opt/poky/2.2.1/sysroots/i686-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-g++
|
| x86_64 | /opt/poky/2.2.1/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-g++
|
 |
Next, go to the Debuggers tab, and click "Add". For name, specify "TSIMX6 GDB". For the paths, specify the location of gdb:
| i686 | /opt/poky/2.2.1/sysroots/i686-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-gdb
|
| x86_64 | /opt/poky/2.2.1/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-gdb
|
 |
Next, go to the "Kits" tab and click add. For Name, enter "TSIMX6". Set device type to "Generic Linux Device". Set the device to "TSIMX6 (default for Generic Linux)". Set the sysroot to: Set QT mkspec to:
/opt/poky/2.2.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/lib/qt5/mkspecs/linux-oe-g++
Make sure there is no space at the end.
Set the compiler to "TSIMX6 GCC". Set Debugger to "TSIMX6 GDB". Set the QT version to "TSIMX6 QT 5.7.1". Finally, click Apply.
 |
| Note: | If you have a red exclamation point over the kits icon that indicates the compiler abi does not match, then you will need to go back through the compiler, gdb, and qmake and browse for the file manually rather than just pasting in the text from this wiki. This is a bug in Ubuntu 16.04's QT Creator, and may be in later versions as well. |
At this point QT Creator is set up to begin a hello world project.