TS-4900 Yocto getting started: Difference between revisions
From embeddedTS Manuals
(Created page with "Yocto itself is a set of scripts and tools used to build a custom Distribution. In our default images we try to include all of the common utilities requested by users so rebu...") |
No edit summary |
||
Line 14: | Line 14: | ||
These images are similar, but the Quad and Solo include different OpenGLES libraries. To write this to an SD card, first partition the SD card to have one large ext4 partition. See the guide [[#Partition i.MX6 SD cards|here]] for more information. Once it is formatted, extract this tar with: | These images are similar, but the Quad and Solo include different OpenGLES libraries. To write this to an SD card, first partition the SD card to have one large ext4 partition. See the guide [[#Partition i.MX6 SD cards|here]] for more information. Once it is formatted, extract this tar with: | ||
<source lang=bash> | <source lang=bash> | ||
# Assuming your SD card is /dev/sdc | # Assuming your SD card is /dev/sdc with one partition | ||
mkfs.ext4 /dev/sdc1 | |||
mkdir /mnt/sd/ | mkdir /mnt/sd/ | ||
sudo mount /dev/sdc1 /mnt/sd/ | sudo mount /dev/sdc1 /mnt/sd/ |
Revision as of 17:25, 5 December 2014
Yocto itself is a set of scripts and tools used to build a custom Distribution. In our default images we try to include all of the common utilities requested by users so rebuilding Yocto should not be necessary in many cases. Our Yocto rootfs is available here:
Yocto Image | Quad | Solo |
ts-x11-image | Download | Download |
These images are similar, but the Quad and Solo include different OpenGLES libraries. To write this to an SD card, first partition the SD card to have one large ext4 partition. See the guide here for more information. Once it is formatted, extract this tar with:
# Assuming your SD card is /dev/sdc with one partition
mkfs.ext4 /dev/sdc1
mkdir /mnt/sd/
sudo mount /dev/sdc1 /mnt/sd/
sudo tar -jxf ts-x11-image-ts4900-quad.rootfs.tar.bz2 -C /mnt/sd
sudo umount /mnt/sd
sync