TS-7100 IO Terminal Block
From embeddedTS Manuals
The TS-7100 features a 2x16 IO header. The mating pluggable terminal block from On Shore (OSTNL321003) is included with the TS-7100.
To plug in or unplug and individual pin, press and hold in the orange tab near the pin.
To remove the entire terminal block from the connector press the orange tabs on each side down. On plugging it back in the tabs will flip back up.
Pin | Description |
---|---|
1 | ttymxc1 RS-232 TXD |
2 | Relay 1 Normally Open |
3 | ttymxc1 RS-232 RXD |
4 | Relay 1 Normally Closed |
5 | ttymxc4 RS-232 TXD |
6 | Relay 1 Common |
7 | ttymxc4 RS-232 RXD |
8 | Relay 2 Normally Closed |
9 | DIG_IN_1_STC GPIO Bank 5 IO 6 |
10 | Relay 2 Normally Closed |
11 | DIG_IN_2_STC GPIO Bank 5 IO 7 |
12 | Relay 2 Common |
13 | DIG_IN_3_STC GPIO Bank 5 IO 8 |
14 | Output Bank 5 IO 0 or Input Bank 5 IO 2 |
15 | CAN_L (can0) |
16 | Output Bank 5 IO 1 or Input Bank 5 IO 3 |
17 | CAN_H (can0) |
18 | Output Bank 6 IO 13 or Input Bank 5 IO 4 |
19 | AN_4_STC |
20 | GND |
21 | AN_3_STC |
22 | GND |
23 | AN_2_STC |
24 | GND |
25 | AN_1_STC |
26 | GND |
27 | AN_0 or High Side Switch Bank 5 IO 15 |
28 | GND |
29 | ttyS0 RS-485+ |
30 | GND |
31 | ttyS0 RS-485- |
32 | GND |