TS-7180 COM Ports: Difference between revisions
From embeddedTS Manuals
mNo edit summary |
No edit summary |
||
Line 31: | Line 31: | ||
| P5-14 | | P5-14 | ||
|} | |} | ||
{{Note|The RS-232 transceiver chip on the board must be enabled before the COM ports can be used. This is done by running the command "'''tshwctl -a 21 -w 3'''" }} |
Revision as of 16:55, 1 June 2018
The TS-7180 provides three standard RS-232 COM ports, and one RS-485 COM port. The latter has auto-transmit-enable. All of these ports are presented on the P5 connector. The RS-485 port has an on-board terminator that may be enabled by installing the "485" jumper.
UART | TX | RX |
---|---|---|
ttymxc1 | P5-5 | P5-6 |
ttymxc4 | P5-2 | P5-3 |
ttymxc6 | P5-7 | P5-8 |
UART | 485+ | 485- |
---|---|---|
ttymxc3 | P5-13 | P5-14 |
Note: | The RS-232 transceiver chip on the board must be enabled before the COM ports can be used. This is done by running the command "tshwctl -a 21 -w 3" |