TS-7180 Daughter Card Interface: Difference between revisions
From embeddedTS Manuals
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The TS-7180 Daughter Card Interface (HD1) may be used to connect a variety of off-board peripherals. | The TS-7180 Daughter Card Interface (HD1) may be used to connect a variety of off-board peripherals. | ||
{| class=wikitable | {| class=wikitable | ||
! Pin | |+ HD8 | ||
! | ! Pin | ||
! Description | |||
|- | |- | ||
| 1 | | 1 | ||
| Line 24: | Line 26: | ||
|- | |- | ||
| 7 | | 7 | ||
| | | HD1_SPI_CS <ref>This is a 5V tolerant input that can be read through gpio bank 2 io 10. As an output this is connected to gpio bank 2 io 0. The output by default is connected to "/dev/spidev2.1". See the [[#SPI]] section for more details.</ref> | ||
|- | |- | ||
| 8 | | 8 | ||
| POE_RX | | POE_RX <ref name=poepin /> | ||
|} | |} | ||
<References /> | <References /> | ||
Revision as of 10:20, 15 June 2021
The TS-7180 Daughter Card Interface (HD1) may be used to connect a variety of off-board peripherals.
| Pin | Description |
|---|---|
| 1 | VIN |
| 2 | POE_78 [1] |
| 3 | GND |
| 4 | POE_45 [1] |
| 5 | GND |
| 6 | POE_TX [1] |
| 7 | HD1_SPI_CS [2] |
| 8 | POE_RX [1] |
- ↑ 1.0 1.1 1.2 1.3 The POE pins can be used with a daughtercard to add POE support to the TS-7180.
- ↑ This is a 5V tolerant input that can be read through gpio bank 2 io 10. As an output this is connected to gpio bank 2 io 0. The output by default is connected to "/dev/spidev2.1". See the #SPI section for more details.