TS-7180 Daughter Card Interface: Difference between revisions
From embeddedTS Manuals
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
The TS-7180 Daughter Card Interface (HD1) may be used to connect a variety of off-board peripherals. | The TS-7180 Daughter Card Interface (HD1) may be used to connect a variety of off-board peripherals. | ||
{| class=wikitable | {| class=wikitable |
Revision as of 10:33, 15 June 2021
The TS-7180 Daughter Card Interface (HD1) may be used to connect a variety of off-board peripherals.
Pin | Description |
---|---|
1 | VIN |
2 | POE_78 [1] |
3 | GND |
4 | POE_45 [1] |
5 | GND |
6 | POE_TX [1] |
7 | HD1_SPI_CS [2] |
8 | POE_RX [1] |
- ↑ 1.0 1.1 1.2 1.3 The POE pins can be used with a daughtercard to add POE support to the TS-7180.
- ↑ This is a 5V tolerant input that can be read through gpio bank 2 io 10. As an output this is connected to gpio bank 2 io 0. The output by default is connected to "/dev/spidev2.1". See the #SPI section for more details.