TS-7180 Daughter Card Interface: Difference between revisions

From embeddedTS Manuals
No edit summary
(HD1 -> HD8)
 
(5 intermediate revisions by one other user not shown)
Line 1: Line 1:
The TS-7180 Daughter Card Interface (HD1) may be used to connect a variety of off-board peripherals.
The TS-7180 Daughter Card Interface (HD8) may be used to connect a variety of off-board peripherals.
 
{|
! Signals
! Pin Layout
|-
|
{| class=wikitable
{| class=wikitable
! Pin #
|+ HD8
! Function
! Pin
! Description
|-
|-
| 1
| 1
Line 24: Line 29:
|-
|-
| 7
| 7
| DIO
| HD1_SPI_CS <ref>This is a 5V tolerant input that can be read through gpio bank 2 io 10. As an output this is connected to gpio bank 2 io 0.  The output by default is connected to <code>/dev/spidev2.1</code>.  See the [[#SPI]] section for more details.</ref>
|-
|-
| 8
| 8
| POE_RX
| POE_RX <ref name=poepin />
|-
|}
| 9
|  
| I2C_DAT
[[File:TS-7180-V3-HD8 Header.svg|250px]]
|-
| 10
| UART_RXD
|-
| 11
| USB-
|-
| 12
| UART_TXD
|-
| 13
| USB+
|-
| 14
| I2C_CLK
|-
| 15
| +5V
|-
| 16
| +5V
|-
| 17
| SPI_MISO
|-
| 18
| SPI_MOSI
|-
| 19
| 3.3V
|-
| 20
| SPI_CLK
|}
|}


<References />
<References />

Latest revision as of 11:32, 11 May 2023

The TS-7180 Daughter Card Interface (HD8) may be used to connect a variety of off-board peripherals.

Signals Pin Layout
HD8
Pin Description
1 VIN
2 POE_78 [1]
3 GND
4 POE_45 [1]
5 GND
6 POE_TX [1]
7 HD1_SPI_CS [2]
8 POE_RX [1]

TS-7180-V3-HD8 Header.svg

  1. 1.0 1.1 1.2 1.3 The POE pins can be used with a daughtercard to add POE support to the TS-7180.
  2. This is a 5V tolerant input that can be read through gpio bank 2 io 10. As an output this is connected to gpio bank 2 io 0. The output by default is connected to /dev/spidev2.1. See the #SPI section for more details.