TS-7180 Daughter Card Interface: Difference between revisions
From embeddedTS Manuals
No edit summary |
(HD1 -> HD8) |
||
(3 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
The TS-7180 Daughter Card Interface ( | The TS-7180 Daughter Card Interface (HD8) may be used to connect a variety of off-board peripherals. | ||
{| | |||
! Signals | |||
! Pin Layout | |||
|- | |||
| | |||
{| class=wikitable | {| class=wikitable | ||
|+ HD8 | |+ HD8 | ||
Line 25: | Line 29: | ||
|- | |- | ||
| 7 | | 7 | ||
| HD1_SPI_CS <ref>This is a 5V tolerant input that can be read through gpio bank 2 io 10. As an output this is connected to gpio bank 2 io 0. The output by default is connected to | | HD1_SPI_CS <ref>This is a 5V tolerant input that can be read through gpio bank 2 io 10. As an output this is connected to gpio bank 2 io 0. The output by default is connected to <code>/dev/spidev2.1</code>. See the [[#SPI]] section for more details.</ref> | ||
|- | |- | ||
| 8 | | 8 | ||
| POE_RX <ref name=poepin /> | | POE_RX <ref name=poepin /> | ||
|} | |||
| | |||
[[File:TS-7180-V3-HD8 Header.svg|250px]] | |||
|} | |} | ||
<References /> | <References /> |
Latest revision as of 11:32, 11 May 2023
The TS-7180 Daughter Card Interface (HD8) may be used to connect a variety of off-board peripherals.
Signals | Pin Layout | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
- ↑ 1.0 1.1 1.2 1.3 The POE pins can be used with a daughtercard to add POE support to the TS-7180.
- ↑ This is a 5V tolerant input that can be read through gpio bank 2 io 10. As an output this is connected to gpio bank 2 io 0. The output by default is connected to
/dev/spidev2.1
. See the #SPI section for more details.