TS-7180 FPGA: Revision history

11 May 2023

• curprev 10:1010:10, 11 May 2023‎ Lionel talk contribs‎ 4,112 bytes +1‎ HD1 -> HD8/HD12

11 May 2022

• curprev 15:2715:27, 11 May 2022‎ Lionel talk contribs‎ 4,111 bytes +691‎ Add FPGA registers for the SPARE_1 MUX
• curprev 14:3014:30, 11 May 2022‎ Lionel talk contribs‎ 3,420 bytes +16‎ Add missing <References />
• curprev 14:2714:27, 11 May 2022‎ Lionel talk contribs‎ 3,404 bytes +82‎ Add MT_RESET# to GPIO list.

25 April 2022

• curprev 13:2613:26, 25 April 2022‎ Lionel talk contribs‎ 3,322 bytes +216‎ Describe which function gives up its UART with registers 307/308

24 January 2022

• curprev 12:3712:37, 24 January 2022‎ Lionel talk contribs‎ 3,106 bytes +104‎ Add defaults to UART selector values and clean up FPGA address info.

1 November 2021

• curprev 16:1616:16, 1 November 2021‎ Lionel talk contribs‎ m 3,002 bytes +5‎ missed word
• curprev 16:1516:15, 1 November 2021‎ Lionel talk contribs‎ 2,997 bytes +373‎ Point to GPIO as the recommended way to access the FPGA's GPIO pins.

21 February 2019

• curprev 10:2310:23, 21 February 2019‎ Mpeters talk contribs‎ 2,624 bytes −1‎ removed the 7 from bit 17 to make bit 1 on GPIO Output Data.

24 July 2018

• curprev 16:0416:04, 24 July 2018‎ Ian talk contribs‎ 2,625 bytes +271‎ No edit summary

18 July 2018

• curprev 12:4312:43, 18 July 2018‎ Ian talk contribs‎ m 2,354 bytes 0‎ No edit summary

11 July 2018

• curprev 16:1016:10, 11 July 2018‎ Ian talk contribs‎ 2,354 bytes +448‎ No edit summary

8 June 2018

• curprev 10:5910:59, 8 June 2018‎ Ian talk contribs‎ 1,906 bytes +13‎ No edit summary

3 March 2017

• curprev 11:3711:37, 3 March 2017‎ Ian talk contribs‎ m 1,893 bytes +21‎ →‎TS-7180 FPGA
• curprev 11:3411:34, 3 March 2017‎ Ian talk contribs‎ m 1,872 bytes −4‎ No edit summary
• curprev 11:3411:34, 3 March 2017‎ Ian talk contribs‎ 1,876 bytes +1,876‎ Created page with "The TS-7180 FPGA registers are accessed over I2C. See the #GPIO section for more information on the recommended method for IO access. The FPGA is available at I2C addres..."