TS-7180 GPS

From embeddedTS Manuals
Revision as of 10:53, 1 March 2017 by Ian (talk | contribs)

The TS-7180 has an on-board Telit SL869 GPS receiver. An SMA female connector is provided for the connection of an antenna.

TS-7180-GPS-Antenna.png

Before it can be used, power to the GPS receiver must be enabled by setting GPIO #19 low, as shown below: 

tshwctl -a 19 -r -w 1

The GPS receiver may then be accessed via the /dev/ttymxc7 uart.

Retrieved from "http://docs.embeddedTS.com/index.php?title=TS-7180_GPS&oldid=8358"