TS-7180 WIFI: Difference between revisions
From embeddedTS Manuals
(Created page with "The TS-7180 uses an [http://www.atmel.com/images/atmel-42569-atwilc3000-mr110ca-ieee802.11bgn-link-controller-with-integrated-bluetooth4.0_datasheet.pdf|Atmel ATWILC3000-MR110...") |
mNo edit summary |
||
| Line 1: | Line 1: | ||
The TS-7180 uses an [http://www.atmel.com/images/atmel-42569-atwilc3000-mr110ca-ieee802.11bgn-link-controller-with-integrated-bluetooth4.0_datasheet.pdf | The TS-7180 uses an [http://www.atmel.com/images/atmel-42569-atwilc3000-mr110ca-ieee802.11bgn-link-controller-with-integrated-bluetooth4.0_datasheet.pdf Atmel ATWILC3000-MR110CA] IEEE 802.11 b/g/n Link Controller Module With Integrated Bluetooth® 4.0. Linux provides support for this module using the wilc3000 driver. | ||
Summary features: | Summary features: | ||
Latest revision as of 12:11, 17 May 2017
The TS-7180 uses an Atmel ATWILC3000-MR110CA IEEE 802.11 b/g/n Link Controller Module With Integrated Bluetooth® 4.0. Linux provides support for this module using the wilc3000 driver.
Summary features:
- IEEE 802.11 b/g/n RF/PHY/MAC SOC
- IEEE 802.11 b/g/n (1x1) for up to 72 Mbps PHY rate
- Single spatial stream in 2.4GHz ISM band
- Integrated PA and T/R Switch Integrated Chip Antenna
- Superior Sensitivity and Range via advanced PHY signal processing
- Advanced Equalization and Channel Estimation
- Advanced Carrier and Timing Synchronization
- Wi-Fi Direct and Soft-AP support
- Supports IEEE 802.11 WEP, WPA, and WPA2 Security
- Supports China WAPI security
- Operating temperature range of -40°C to +85°C