TS-7250-V3 Buster Getting started: Difference between revisions
From embeddedTS Manuals
m (FTP links auto-updated (https://files.embeddedarm.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-buster-latest.tar.xz → https://files.embeddedarm.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-buster-latest.tar.bz2)) |
No edit summary |
||
| Line 1: | Line 1: | ||
Once installed, the default user is "root" with no password. | Once installed, the default user is "root" with no password. | ||
* [https://files.embeddedarm.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-buster-latest.tar.bz2 tsimx6ul-debian-buster-latest.tar.xz] ([https://files.embeddedarm.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-buster-latest.tar.bz2 | * [https://files.embeddedarm.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-buster-latest.tar.bz2 tsimx6ul-debian-buster-latest.tar.xz] ([https://files.embeddedarm.com/ts-arm-sbc/ts-7250-v3-linux/distributions/debian/tsimx6ul-debian-buster-latest.tar.bz2.md5 md5]) | ||
{{Note|This is a shared image that supports the TS-7100 and TS-7250-V3}} | {{Note|This is a shared image that supports the TS-7100 and TS-7250-V3}} | ||
Revision as of 11:37, 15 October 2021
Once installed, the default user is "root" with no password.
| Note: | This is a shared image that supports the TS-7100 and TS-7250-V3 |
This image can be written to a USB drive, or to the eMMC. For development, a USB thumbdrive will be simplest. If a bootable USB drive is connected this will take priority over other boot media. Plug in a USB drive and check the last output from "dmesg" to get the USB disk. For example, this may be /dev/sdc.
# Erase all older partitions
sudo sgdisk --zap-all /dev/sdc
# Create one GPT Linux partition
sudo sgdisk -n 0:0:0 -t 0:8300 /dev/sdc
# Create a filesystem and mount
sudo mkfs.ext4 /dev/sdc1
sudo mkdir /mnt/usb/
sudo mount /dev/sdc1 /mnt/usb/
# Extract downloaded image:
sudo tar --numeric-owner -xf tsimx6ul-debian-buster-latest.tar.xz -C /mnt/usb/
sudo chmod 755 /mnt/usb/
sudo umount /mnt/usb/
These commands will also work while booted from a USB drive to rewrite the eMMC. Instead of /dev/sdc you would use /dev/mmcblk0, and instead of /dev/sdc1 you would use /dev/mmcblk0p1.